Bung King Kickstand Block

Bung King Kickstand Block

If you are running extra tall shocks or front forks, your bike may experience an excessive angle when leaned over on the kickstand. Our kickstand lift block can help eliminate this issue. It bolts directly to the bottom of your kickstand with the supplied hardware and adds 1" or 2" to the height of the kickstand. The 1" version is used on most models with taller rear shocks and the 2" version is normally used for bikes with taller shocks and longer fork tubes.  You just mark your kickstand with the supplied template, drill the two mounting holes and install it in place.

Features:

• Made of billet 6061-T6 aluminum
• Cut to match the kickstand contour of most factory kickstands
• Hardware included
• Sold as a kit