Products

Sly Fox Riser Adpaters Feature: T-Bar adapter Made From 6061 T6 Aluminum  Allows for Mounting of Tall Risers or T-Bars While Leaving Gauges in the Stock Location 3.5in Center to Center Mounting Holes  Made in the USA

Sly Fox Riser Kits Features: Made with 6061-T6 Aluminum 1" clamping area 3-1/2" center-to-center riser spacing Top clamp and hardware included Made in the U.S.A.

Slyfox Carbon Horn Cover Fits the OEM horn, Mounts to existing hardware

SlyFox Custom 49mm Triple Trees CNC-machined 6061-T6 aluminum construction Zinc-plated steel stem Six lb lighter than stock trees Stock rakes include fork stop Accepts stock risers and bushings Compatible with OEM upper stem assembly and bearings Made in the U.S.A. FLTR models will require gauge relocation. Will require relocation of ignition switch. Not for use with fork boot covers/sliders.

Slyfox Dash Panel Aerospace-grade/mil-spec carbon fiber, Vacuum-bagged, Autoclave-cured

OE replacement triple clamp Available in just the upper clamp CNC machined 6061-T6 Aluminum Zinc-plated steel bottom stem provided in the full kit Lighter and stronger than stock Made in the USA Ignition switch delete required

Smooth Top Clamp Smooth and Blacked out top clamp for your bar set up! Features: OEM Styling Gloss Black or Chrome 1in Diameter Comes with Black Bolt Covers

Snap Ring Remover Tool Snap ring remover tool will remove the Timken bearing outer race snap ring without damage to the case. You can replace the snap ring in Big Twin cases without the fear of gouging the aluminum on the cases. Fitment Harley Davidson FLST 1990 Harley Davidson FLST 1991 Harley Davidson FLST 1992 Harley Davidson FLST 1993 Harley Davidson FLST 1994 Harley Davidson FLST 1995 Harley Davidson FLST 1996 Harley Davidson FLST 1997 Harley Davidson FLST 1998 Harley Davidson FLT 1990 Harley Davidson FLT 1991 Harley Davidson FLT 1992 Harley Davidson FLT 1993 Harley Davidson FLT 1994 Harley Davidson FLT 1995 Harley Davidson FLT 1996 Harley Davidson FLT 1997 Harley Davidson FLT 1998 Harley Davidson FXD 1991 Harley Davidson FXD 1992 Harley Davidson FXD 1993 Harley Davidson FXD 1994 Harley Davidson FXD 1995 Harley Davidson FXD 1996 Harley Davidson FXD 1997 Harley Davidson FXD 1998 Harley Davidson FXR 1990 Harley Davidson FXR 1991 Harley Davidson FXR 1992 Harley Davidson FXR 1993 Harley Davidson FXR 1994 Harley Davidson FXST 1990 Harley Davidson FXST 1991 Harley Davidson FXST 1992 Harley Davidson FXST 1993 Harley Davidson FXST 1994 Harley Davidson FXST 1995 Harley Davidson FXST 1996 Harley Davidson FXST 1997 Harley Davidson FXST 1998

4.5” HIGH FLOW PERFORMANCE ROLLED CONE MUFFLER WITH STEPPED BAFFLE FROM 2 ¼ TO 2 ½ INCHES. INCREASES BOTTOM TO MID RANGE TORQUE AND HORSEPOWER ON ALL MOTORS. TUNED PROPERLY CAN ACCOMMODATE 88" TO 143". 065 STAINLESS STEEL HEADERS, STEPPED FROM 1 ¾” TO 1 7/8” TO 2” AT THE COLLECTOR HAND TIG WELDED FROM TOP TO BOTTOM MACHINED STAINLESS STEEL HEADER COLLARS 18MM O2 BUNGS WITH 12MM ADAPTERS, ALLOWS FOR STOCK OR AUTOTUNE SENSORS COMPLETE HARDWARE KIT WITH EVERYTHING YOU NEED TO MOUNT IT UP

PRECISELY PIE CUT AND TIG WELDED BACK TOGETHER BY HAND AT OUR FACTORY RIGHT HERE IN LAKE ELSINORE, CA. A METICULOUSLY PAIN STAKING PROCESS, BUT THE RESULTS ARE A WORK OF ART IN THE END. 4.5” HIGH FLOW PERFORMANCE ROLLED CONE MUFFLER WITH STEPPED BAFFLE FROM 2 ¼ TO 2 ½ INCHES. INCREASES BOTTOM TO MID RANGE TORQUE AND HORSEPOWER ON ALL MOTORS. TUNED PROPERLY CAN ACCOMMODATE 88" TO 143". 065 STAINLESS STEEL HEADERS, STEPPED FROM 1 ¾” TO 1 7/8” TO 2” AT THE COLLECTOR HAND TIG WELDED FROM TOP TO BOTTOM MACHINED STAINLESS STEEL HEADER COLLARS 18MM O2 BUNGS WITH 12MM ADAPTERS, ALLOWS FOR STOCK OR AUTOTUNE SENSORS COMPLETE HARDWARE KIT WITH EVERYTHING YOU NEED TO MOUNT IT UP

4” ROLLED CONE MUFFLER WITH A 2 ¼ COILED PERFORATED BAFFLE FOR INCREASED TORQUE AND A DEEP TONE 065 STAINLESS STEEL HEADERS STEPPED FROM 1 ¾” TO 1 7/8” TO 2” AT THE COLLECTOR CNC BILLET ALUMINUM ENDCAP HAND TIG WELDED FROM TOP TO BOTTOM MACHINED STAINLESS STEEL HEADER COLLARS 18MM O2 BUNGS WITH 12MM ADAPTERS, ALLOWS FOR STOCK OR AUTOTUNE SENSORS COMPLETE HARDWARE KIT WITH EVERYTHING YOU NEED TO MOUNT IT UP

4” ROLLED CONE MUFFLER WITH A 2 ¼ COILED PERFORATED BAFFLE FOR INCREASED TORQUE AND A DEEP TONE 065 STAINLESS STEEL HEADERS STEPPED FROM 1 ¾” TO 1 7/8” TO 2” AT THE COLLECTOR. HAND TIG WELDED FROM TOP TO BOTTOM MACHINED STAINLESS STEEL HEADER COLLARS 18MM O2 BUNGS WITH 12MM ADAPTERS, ALLOWS FOR STOCK OR AUTOTUNE SENSORS COMPLETE HARDWARE KIT WITH EVERYTHING YOU NEED TO MOUNT IT UP

FITS EVERY 2017-2024 TOURING MODEL INCLUDING ALL CVO’S AND NEW 2024 WITH VVT AND UPDATED ENGINE COVERS 4.5” HIGH FLOW PERFORMANCE ROLLED CONE MUFFLER WITH STEPPED BAFFLE FROM 2 ¼ TO 2 ½ INCHES. INCREASES BOTTOM TO MID RANGE TORQUE AND HORSEPOWER ON ALL MOTORS. TUNED PROPERLY CAN ACCOMMODATE 88" TO 143". 065 STAINLESS STEEL HEADERS, STEPPED FROM 1 ¾” TO 1 7/8” TO 2” AT THE COLLECTOR HAND TIG WELDED FROM TOP TO BOTTOM MACHINED STAINLESS STEEL HEADER COLLARS 18MM O2 BUNGS WITH 12MM ADAPTERS, ALLOWS FOR STOCK OR AUTOTUNE SENSORS COMPLETE HARDWARE KIT WITH EVERYTHING YOU NEED TO MOUNT IT UP

FITS EVERY 2017-2024 TOURING MODEL INCLUDING ALL CVO’S AND NEW 2024 WITH VVT AND UPDATED ENGINE COVERS PRECISELY PIE CUT AND TIG WELDED BACK TOGETHER BY HAND AT OUR FACTORY RIGHT HERE IN LAKE ELSINORE, CA. A METICULOUSLY PAIN STAKING PROCESS, BUT THE RESULTS ARE A WORK OF ART IN THE END. 4.5” HIGH FLOW PERFORMANCE ROLLED CONE MUFFLER WITH STEPPED BAFFLE FROM 2 ¼ TO 2 ½ INCHES. INCREASES BOTTOM TO MID RANGE TORQUE AND HORSEPOWER ON ALL MOTORS. TUNED PROPERLY CAN ACCOMMODATE 88" TO 143". 065 STAINLESS STEEL HEADERS, STEPPED FROM 1 ¾” TO 1 7/8” TO 2” AT THE COLLECTOR HAND TIG WELDED FROM TOP TO BOTTOM MACHINED STAINLESS STEEL HEADER COLLARS 18MM O2 BUNGS WITH 12MM ADAPTERS, ALLOWS FOR STOCK OR AUTOTUNE SENSORS COMPLETE HARDWARE KIT WITH EVERYTHING YOU NEED TO MOUNT IT UP