

TMF Signature Risers
from $359.00
TMF Signature Risers
Our TMF Signature Risers are made from 6061 Aluminum and come with American Made stainless polished hardware. Made right here in the Bay Area with pure style and function in mind. Available multiple sizes 6/8/10 as well as in straight or pull back. Gloss black powder coat and chrome finishes.
Features:
Fits on all models with 3.5" center on center
Works with any standard 1" handlebar
Pull Back Risers feature 1.5" off Pull Back
Sold in pairs with top clamp and 8 Polished SS Hardware
Base hole tapped for standard 1/2 " x 13 mounting bolts
Made in the U.S.A.


TMF Signature Bend Bars
from $128.99
TMF Signature Bend Bars
Back Again! TMF Bend Bars with a total width of 30.5 rise of 4 and 2.5 pullback. These are give an 18 degree upwards toward the rider for a more aggressive feel for your bike! Available TBW!

TMF Signature Risers Gauge Bracket
from $59.99
TMF Signature Risers Gauge Bracket
Our TMF Signature parts are made from 6061 Aluminum and come with American Made stainless polished hardware. Made right here in the Bay Area with pure style and function in mind. Gloss black powder coat and chrome finishes.
Features:
Fits Standard 4.25' Gauge Brackets Single and Dual
Great for Converting to OG Gauge Look
Made in the U.S.A.

TMF Signature Series Pull Back Plate
$189.00
TMF Signature Series Pull Back Plate
This Pull Back Plate is specially designed for Road Glide, but will work for Dyna/Softail/FXR models as well.
Bolt it to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5" so that you can mount any standard risers and they will clear the Gauges on 2014 up Road Glides. The Plate adds 2" of total height to the bar/riser on 2014 to present bagger. Holes will need to be cut in the bagger Nacelle for the risers to come through.Please be aware that you will lose the Accessory and Fork Lock positions of the stock Key Switch. On CVO models the stock Steering Lock will interfere and cannot be used. Check with your local shop or dealership for options. Some bikes can be reprogrammed to not need the key switch at all with the Harley CVO Flash.
Features:
- 6061 Aluminum
- Solid Riser Bushings (Eliminate Flex)
- Includes all Hardware
- Plates is Powdercoated Gloss Black
- Made In the USA


Fly Bars for 1 1/8 Risers
from $69.95
Fly Bars for 1 1/8 Risers
If your going with a MX Bar and Riser combo on your bike, Forbidden Motorcycles is the originator. Paired with a set of Forbidden Risers or your favorite 1 1/8 riser, you cant beat the look and performance.
Features:
Quality T6 Aluminum
Slotted for Internal Wirings
1 Inch Control Area Eliminates Sleeves
TBW and Cable Options
Available in 2.5in to 4.5in


Biltwell Tracker Bars
$79.00
Biltwell Tracker Bars
These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. Available smooth for custom and non H-D applications or dimpled to accept original equipment Harley-Davidson hand controls.
Features:
Available in Chrome or Black
Stock 1 Inch Diameter
Available in Low or High Bends
2 ¼ Rise 30 ½ Width
5in Clamping Diameter


Bung King 1 Piece Risers
$164.99
Bung King 1 Piece Lower Riser
One piece lower riser that works with most stock OEM Harley top clamps and speed mounts. They can be drilled to accept internal wiring and are a staple for classic looks and styling.
Features:
Made of Mild Steel and Power Coated Gloss or Satin Black
Tapped to Accept ½-13 Stock Riser Bolts
Accepts 1in Handle Bars
Custom Sizes Available
Proudly Made In Campbell CA


Thrashin Supply Risers
from $429.95
Thrashing Supply Risers
Be proud of what you put on your bike. At Thrashin Supply Co. we strive to build the best parts, without cutting corners, right here in the United States of America.
Our Thrashin Supply Risers are made of Domestic 6061 Aluminum and paired with ARP Hardware. Our black finish is a hard anodized black with a Anti-Fade agent while our chrome finish is triple nickel plated (known as triple chrome) to withstand severe weather conditions, so our risers stay looking fresh for years to come.
All of our top clamps are angled at 35 degrees whether your choose a pull back or straight riser. This gives our risers a stylish look and feel as well as making the new M8 Gauges read perfectly for the rider at any height.
Features:
Fits on all models with 3.5" center on center riser spacing most OE Harley-Davidsons
Works with any standard 1" handlebar,
Top upper clamp bolts are 4.25 center on center
Pull Back Risers feature 1.5" off Pull Back
Sold in pairs with top clamp and 4 ARP Hardware included 5/16-18 x 1"
Base hole tapped for standard 1/2" x 13 mounting bolts (Bolts not included)(STANDARD SIZE)
Made in the U.S.A.


Thrashin Supply Gauge Cut Risers
from $529.95
Thrashin Supply Risers With Gauge Cutout For Harley
Be proud of what you put on your bike. Thrashin Supply Co. strives to build the best parts, without cutting corners, right here in the United States of America. Thrashin Supply Risers are made of Domestic 6061 aluminum and paired with ARP hardware. The black finish is a hard anodized black with an anti-fade agent added while the chrome finish is triple nickel plated (known as triple chrome) to withstand severe weather conditions, so your risers stay looking fresh for years to come. Top clamps are angled at 35 degrees whether you choose a pull back or straight riser. This gives the risers a stylish look and feel, as well as making the M8 gauges read perfectly for the rider, at any height.
Features:
For 1" diameter handlebars
Risers are 3 1/2" center to center spacing
Top upper clamp bolts are 4 1/4 center to center
Pull Back Risers feature 1 1/2" of pull back
Sold in pairs with top clamp and 4 ARP Hardware included (5/16-18 x 1")
Base hole tapped for standard 1/2" x 13 mounting bolts (bolts sold separately)
Made in the USA


Biltwell Murdock Risers
from $289.95
Biltwell Murdock Risers
Murdock risers feature investment-cast steel top clamps and lower threaded bases, and are connected by two 1-inch O.D. x 0.120” (3mm) wall seamless 4130 chromoly tubes. After TIG welding the finished unit is hand polished and triple chrome or satin black plated for style and durability.
Features:
Full TIG Welded Chromoly
Hand Polished
Triple Chromed or Satin Black
1in OD Uprights
Fits OEM Trees
Fits OEM Gauge Brackets
½-13 Threaded holes on Mounting Base


Forbidden Risers
from $239.95
Forbidden Risers
If you’re going with a MX Bar and Riser combo on your bike, Forbidden Motorcycles is the originator. Forbidden Risers are the original 1 1/8 riser, you cant beat the look and performance.
Features:
Quality T6 Aluminum
T6061 Aluminum
Pre-Drilled for Internals
One Piece Top Clamp
9"/11" With or Without Gauge Tabs
Black or Raw


Forbidden Risers FXBB
from $260.95
Forbidden Risers FXBB
If you’re going with a MX Bar and Riser combo on your bike, Forbidden Motorcycles is the originator. Forbidden Risers are the original 1 1/8 riser, you cant beat the look and performance.
Features:
Quality T6 Aluminum
Keep HUD Gauges
T6061 Aluminum
Pre-Drilled for Internals
One Piece Top Clamp
9"/11" With or Without Gauge Tabs
Black or Raw


Kraus Kickback Isolated Riser
from $622.00
Kraus Kickback Isolated Riser
Increase comfort and control with Kickback Isolated Risers. The Kickback moves the bars 1.5" towards the rider. Kickback risers utilize our Isolated Riser technology while increasing overall structural solidity with a one-piece Kickback center section. The entire riser unit is designed to offer the most solid secure mount, while still retaining vibration damping, solving the problem of unwanted handlebar movement.
The Isolated Risers incorporates vibration dampening rubber bushings in the clamp body, directly below your handlebars. The proprietary use of these rubber isolators take the vibration out of the bars but do not allow excessive movement caused by leverage, like traditional OEM rubber mounted bar setups. With a stronger connection to your front suspension, you have more control. Running Isolated Riser Clamps allows precise input into steering, enhancing control.
Handlebar clamping area is 1⅛" for MX style bars or 1" for traditional OEM Harley and aftermarket bars.
Features:
The secure feeling of a rigidly mounted handlebar but without the vibration.
Bar Clamp has an opening to accommodate hidden wiring.
Choose bar clamp for 1⅛ Moto bars or traditional 1" bars.
Bushing life is increased for less maintenance.
3.5” on center for standard OEM Harley fitment.
Ships with 1 solid riser bushing set.
measured from the bottom of the riser to the middle of the bar clamp


Kraus Isolated Riser
from $563.00
Kraus Isolated RisersKRAUS has developed the solution for bad handling, sloppy bars.The Isolated Riser Bar Clamp is designed to offer a solid secure mount, and vibration damping, solving the problem of unwanted handlebar movement.The Isolated Risers house vibration dampening rubber bushings in the clamp body, directly below your handlebars. The proprietary use of these rubber isolators take the vibration out of the bars but do not allow excessive movement caused by leverage like traditional OEM rubber mounted bar setups. Isolated Risers are mounted to your top triple tree using the provided solid bushings. With a stronger, solid connection to your front suspension, you have more control. Running Isolated Risers allows precise input into steering, enhances control and dissipates vibration in your bars and hands.


Classic Risers
from $247.34
Classic Straight Risers
Looking for a classic, timeless look for your bike. These risers will provide just that! Black or chrome.
Features:
Precision Machined Aluminum
1 ¼ Upright
Works with all 1in Bars
Compatible with Stock Clamps
Accepts Stock Riser Bolts
Recommend Upgrading Bushings