
Guerrilla Cables Plug n Play Extensions
from $33.95
Guerrilla Cables Plug n Play Extensions
Guerrilla cables has taken out the need to de-pin your wiring harness when installing taller bars. These plug n play harnesses are the go to for a quick and painless install
Features:
Direct OEM Replacement
Weatherproof Plugs and Sealing
Made in the USA

Guerrilla Cable Fender Harness
from $36.99
Guerrilla Cabes Rear Fender Harness
This is a Guerrilla Cables replacement harness for easy plug-n-play installation to match the OEM factory harness on Softail/Dyna Models.
A great option for these bikes when replacing/upgrading to a tail light with integrated turn signals or a full fender conversion.

Guerrilla Cables Speedo Relocation Harness
$169.95
Guerrilla Cables Speedo Relocation Harness
Stand out in the crowd of Dynas when you use this harness to relocate you gauges from the tank to the bars. Kits also available to add a tach to your tach-less street bob.
Features:
OEM Replacement
All Plugs and Connectors
Weather Proof
Made in the USA

NAMZ Throttle By Wire Replacements
$135.95
NAMZ Throttle By Wire Replacements
Features:
Replacement twist grip sensor for all throttle-by-wire motorcycles
Plug and play

Dynatek TC88-3
$294.65
Dynatek TC88-3
For anyone looking to upgrade their bikes motor, you’re going to need ignition to get the timing correct. Not only has Dynatek been in the bike game for along time, they are also the best.
Features:
Module has a single connector
Loaded with 16 different advance curves, giving engine builder a wide range of curves to work with
Adjustable rev limiter allows the user to select a rev limit ranging from 5,750 to 7,500 rpm in 250 rpm steps

Daytona TwinTec TC 88
from $264.43
Daytona TwinTec TC 88
Daytona TwinTec TC88 digital performance ignition signals a new era in twin cam ignition power and capability.The tc88 enhances the power of the single fire ignition by allowing selection between 16 programmable advance curves, covering the entire range of engine modifications.From stock to insanely modified engines, the tc88 provides the widest range and highest level of advance curve functionality for twin cam available in today's market.There are also eight different rev limiter settings from 5750-7250 rpm.All tc88 functions have full digital accuracy to insure maximum performance with unparalleled quality.Not legal for use in california on pollution controlled vehicles - check local laws before installing.

Dynatek Ignition TC88 2P
$274.99
Dynatek TC88 2p
For anyone looking to upgrade their bikes motor, you’re going to need ignition to get the timing correct. Not only has Dynatek been in the bike game for along time, they are also the best.
Features:
Dynatek is the performance leader for quality electronic products in the motorcycle industry. With the help of top racers and motorcycle builders around the world, Dynatek has worked to create the electronic products necessary to support the modern motorcycle
This is a single-fire, fully programmed performance ignition system
Sixteen programmable advance curves fall into three groups: stock to slightly modified motors, heavily modified motors and insanely modified motors
Eight rev-limiter settings in 250-rpm steps from 5750-7250 rpm
Full digital accuracy in all functions
Compatible with stock and performance coils -- less than 1-ohm resistance
Constant monitoring of coil current to provide constant full spark energy
Uses all stock sensors and connectors
Built-in reverse battery and spike protection
Data recording monitors 6 functions: total engine hours, time wide open throttle, longest time operating at wide open throttle, max rpm, seconds near rev limit and number of engine starts
PC programmability makes possible an eight point fully definable wide open throttle curve and a fully definable part throttle curve, programmable rev limit in 50 rpm steps, 0-5 programmable dead cranking revs, total of +/- 10° rear cylinder offset, programmable rev limiter, and security lock out (pin # activated)
Not for fuel-injected models


Daytona Twin Tec Ignition Kit
from $475.00
$595.95
Daytona Twin Tec Ignition Kit
99-03
Daytona Twin Tec LLC has a simple philosophy - do one thing and do it well Kit for Twin Cam 88 99-03 carb models features an ignition module, spark plug wires and single-fire coil Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors Five rotary switches for timing adjustments, advanced slope and rpm limits Digital rpm limiter (set in 100-rpm steps) Selectable multi-spark mode for quick starts and smooth running Coil outputs are protected against short circuits Optional PC link cable and software available for programming custom curves, programs available at (www.daytona-twintec.com) Instructions included Made in the U.S.A. For models listed with two 12-pin ignition module connectors
04-05
Includes new 12-pin TC88A ignition module, PC link cable, single-fire coil, and spark plug wires Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors Five rotary switches for timing adjustments, advanced slope and rpm limits Digital rpm limiter (set in 100-rpm steps) Selectable multi-spark mode for quick starts and smooth running Coil outputs are protected against short circuits Instructions included Made in the U.S.A.

Cycle Electric 50A Charging Kit
from $629.95
Cycle Electric 50A Charging Kit
Cycle Electric Inc alternator kits combine our state of the art stator with our legendary bullet proof rectifying regulator and a stock Harley rotor. They deliver better low speed output and a smoother charge to the battery for crisper starting and longer battery life. You will not find a more durable or longer lasting system. They have a full two year guarantee and are 100% American made.
Features:
Cycle Electric Inc. alternator kits combine our state of the art stator with our legendary bullet proof rectifying regulator and a stock Harley rotor.
They deliver better low speed output and a smoother charge to the battery for crisper starting and longer battery life.
You will not find a more durable or longer lasting system.
Kits produce 32A at 1,000 rpm and 54A at 2,500 rpm
Improved durability and dependability than stock system
Made in the U.S.A.

Cycle Electric 58A Charging Kit
from $754.95
Cycle Electric 58A Charging Kit
Cycle Electric Inc alternator kits combine our state of the art stator with our legendary bullet proof rectifying regulator and a stock Harley rotor. They deliver better low speed output and a smoother charge to the battery for crisper starting and longer battery life. You will not find a more durable or longer lasting system. They have a full two year guarantee and are 100% American made.
Features:
Cycle Electric Inc. alternator kits combine our state of the art stator with our legendary bullet proof rectifying regulator and a stock Harley rotor.
They deliver better low speed output and a smoother charge to the battery for crisper starting and longer battery life.
You will not find a more durable or longer lasting system.
Produce 36 amps at 1000 RPM and 58 amps at 2500 RPM
Designed to produce more power to run extra accessories such as lights or stereos
Kit includes rotor, stator and rectifying regulator
Improved durability and dependability than stock system
Made in the U.S.A.


Cycle Electric 3 Phase 38A Charging Kits
from $151.95
Cycle Electric 3 Phase 38A Charging Kits
Features:
Get more power out of a smaller stator
Kits deliver 17A at 1,000 rpm and 38A at 2,500 rpm
Made in the U.S.A.


Cycle Electric Alternator Kits
from $142.95
Cycle Electric Alternator Kits
Features:
Kits include stator, rotor, black rectifying voltage regulator and mounting hardware
Made in the U.S.A.
Adding electrical accessories increases amperage usage. When doing so, it is important to consider amperage ratings of switches and wires. If you draw too many amps through a switch or wire, it will heat up and may burn. Fuses and breakers are sized to protect wiring and switches. DO NOT CHANGE 30A MAIN BREAKER TO A 50A BREAKER. THE SWITCHES AND WIRING WILL NOT BE PROTECTED.


Terry High Output Slugger Starter
from $440.95
$565.95
Terry High Output Slugger Starter
This 1.8 kw High Torque Starter, offers superior windings, high tolerance heavy duty clutch, and a thicker commentator that resist flying shorts. Static balanced for smoother operation, it has the torque to start any monster motor with the least amount of amperage drain. The low profile design will clear the electronic speedometer for easy installation. Available in wrinkled black.
Features:
Starters are assembled in the U.S.A. with heavy-duty components and tested with state-of-the-art equipment.
Starter offers superior windings, high-tolerance heavy-duty clutch and a thicker commutator that resists flying shorts
Static balanced for smoother operation
Low-profile design will clear the electronic speedometer sensor for easy installation
Made in the USA

Thunder Heart Stand Alone Ignition
$365.95
Features:
Want to run a Twin Cam motor in your custom bike
With Thunder Heart Performance's new Twin Cam Stand-Alone Ignition, you can...easily
This ignition is designed for use in custom bike applications where a Twin Cam motor and crank position sensor are going to be used
It consolidates all ignition components into a small, easy-to-mount package
Wiring the ignition system is a snap, because the builder doesn't need a factory Harley wiring harness
The included Smart Link software allows the user to fully program the front and rear spark timing and rev limit with a laptop computer

NGK Spark Plugs
from $2.95
NGK Special Spark Plugs
The name NGK is nothing new to engines. These premium OEM and Hi Performance spark plugs are exact what you need for your new engine build or annual tune up.
Features:
Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
Corrugated ribs prevent flashover
Pure alumina silicate ceramic insulator provides superior strength and better heat transfer
Copper core aids in heat removal
Triple seals prevent leakage
Sold individually