

TMF Signature Bend Bars
from $128.99
TMF Signature Bend Bars
Back Again! TMF Bend Bars with a total width of 30.5 rise of 4 and 2.5 pullback. These are give an 18 degree upwards toward the rider for a more aggressive feel for your bike! Available TBW!


Thrashin Supply Riser Handle Bar
$149.95
Thrashin Supply Riser Handle Bar
Features:
Drilled and slotted for internal wiring
Knurled for maximum clamp grip
Throttle-By-Wire keyholes allow late-style bike fitments (Cable throttle bikes will need to use TBW handlebar plug)
Laser-etched THRASHIN® logo
Made in U.S.A.


Todds Cycles Motolow Bars 1"
from $149.95
Motocross style bar low profile
Slotted for internal wiring
No knurling
Made in the U.S.A.


Biltwell Tracker Bars
$79.00
Biltwell Tracker Bars
These handlebars are constructed with seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes. Available smooth for custom and non H-D applications or dimpled to accept original equipment Harley-Davidson hand controls.
Features:
Available in Chrome or Black
Stock 1 Inch Diameter
Available in Low or High Bends
2 ¼ Rise 30 ½ Width
5in Clamping Diameter


Fly Bars for 1 1/8 Risers
from $69.95
Fly Bars for 1 1/8 Risers
If your going with a MX Bar and Riser combo on your bike, Forbidden Motorcycles is the originator. Paired with a set of Forbidden Risers or your favorite 1 1/8 riser, you cant beat the look and performance.
Features:
Quality T6 Aluminum
Slotted for Internal Wirings
1 Inch Control Area Eliminates Sleeves
TBW and Cable Options
Available in 2.5in to 4.5in


ODI Podium V-Twin Handlebars
$114.95
ODI Podium V-Twin Handlebars
Features:
Constructed of 7075-T6 alloy for added strength
Shot-peened and hard anodized black for improved durability
Slotted for internal wiring and notched for TBW
Laser-etched ODI graphics
Knurled left side helps with grip bar adhesion


Performance Machine PhatBar Handlebar and Riser Kits
$479.95
Performance Machine PhatBar Handlebar and Riser Kits
Features:
Comes complete with a fly-by-wire ready aluminum handlebar and a billet riser set that mount to most Harley Davidson models
Bar features an 1-1/4" clamping area tapered down to 1" to accommodate stock hand controls without any modifications
Bar made from 7050-T6 aluminum with a 3” rise and slots for internal wiring
Risers feature a 9” rise and are made from 6061-T6 billet aluminum
Compatible with cable throttle and electronic throttle applications


Fat Baggers inc EZ Install Flat Top Handle Bars 1.25In
$449.95
Fat Baggers inc EZ Install Flat Top Handle Bars 1.25In
Features:
Revolutionary bolt-together two-piece handlebar design that takes up half the shelf space, is easy to ship and even faster to install
CNC mandrel-bent from 1-1/4" diameter x .120" wall heavy tube
EZ Install no more need to fight internal wiring; with our handlebars you can install wiring in minutes
Bars are knurled and notched for TBW applications
Made in the U.S.A.
Accept OEM heated grips
Patent No. 10,946,926


Fat Baggers Inc EZ Install Pointed Top Handle Bars 1.25In
$449.95
Fat Baggers Inc EZ Install Pointed Top Handle Bars 1.25
Features:
Revolutionary bolt-together two-piece handlebar design that takes up half the shelf space, is easy to ship and even faster to install
CNC mandrel-bent from 1-1/4" diameter x .120" wall heavy tube
EZ Install no more need to fight internal wiring; with our handlebars you can install wiring in minutes
Feature a billet machined top with a large internal machined radius that allows for EZ pulling of wiring (non-welded top corner)
Bars are knurled and notched for TBW applications
Made in the U.S.A.
Patent No. 10,946,926


Fat Baggers Inc EZ Install Flat Top Handle Bars 1.5in
$524.95
Fat Baggers Inc EZ Install Flat Top Handle Bars
Features:
Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even fast to install
A top, non-welded joint allows for a large internally machined wiring cavity to pull wires through the inside of the tubing in minutes
CNC mandrel-bent from 1-½” diameter x .095” wall heavy tube
Adjustable 1-½" collar next to handlebar controls for a custom finished look
Bars are knurled and notched for TBW applications
Made in the U.S.A.
Accepts OEM heated grips
Patent No. 10,946,926


Fat Baggers Inc EZ Install Pointed Top Handle Bars 1.5in
$524.95
Fat Baggers Inc EZ Install Pointed Top Handle Bars
Features:
Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even fast to install
CNC mandrel-bent from 1-½” diameter x .095” wall heavy tube
Adjustable 1-½" collar next to handlebar controls for a custom finished look
EZ install - no more need to fight internal wiring, install in minutes
Billet machined top with a large internal machined radius allows for EZ pulling of wiring (non-welded top corner)
Bars with "squared" lower bends also have additional slots to ease wire routing
Bars are knurled and notched for TBW applications
Made in the U.S.A.
Accepts OEM heated grips
Patent No. 10,946,926

7/8" to 1" Bar Adapter
$11.99
7/8" to 1" Bar Adapter
Features:
Two-piece shim kit affixes to 7/8" diameter handlebars to allow installation of any 1" clamp accessory mount without modification
Stamped aluminum construction for long-lasting durability