
TMF Signature Series Pull Back Plate
$189.00
TMF Signature Series Pull Back Plate
This Pull Back Plate is specially designed for Road Glide, but will work for Dyna/Softail/FXR models as well.
Bolt it to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5" so that you can mount any standard risers and they will clear the Gauges on 2014 up Road Glides. The Plate adds 2" of total height to the bar/riser on 2014 to present bagger. Holes will need to be cut in the bagger Nacelle for the risers to come through.Please be aware that you will lose the Accessory and Fork Lock positions of the stock Key Switch. On CVO models the stock Steering Lock will interfere and cannot be used. Check with your local shop or dealership for options. Some bikes can be reprogrammed to not need the key switch at all with the Harley CVO Flash.
Features:
- 6061 Aluminum
- Solid Riser Bushings (Eliminate Flex)
- Includes all Hardware
- Plates is Powdercoated Gloss Black
- Made In the USA

TMF Signature Risers Gauge Bracket
from $59.99
TMF Signature Risers Gauge Bracket
Our TMF Signature parts are made from 6061 Aluminum and come with American Made stainless polished hardware. Made right here in the Bay Area with pure style and function in mind. Gloss black powder coat and chrome finishes.
Features:
Fits Standard 4.25' Gauge Brackets Single and Dual
Great for Converting to OG Gauge Look
Made in the U.S.A.


Sly Fox Riser Adpaters
from $245.95
Sly Fox Riser Adpaters
Feature:
T-Bar adapter
Made From 6061 T6 Aluminum
Allows for Mounting of Tall Risers or T-Bars While Leaving Gauges in the Stock Location
3.5in Center to Center Mounting Holes
Made in the USA


Thrashin Riser Adapter
$199.95
Thrashin Riser Adapter
The design of our Riser Adapter has 2 grade 8 bolts dropping down through the triple clamp to our chromoly steel bushing/nut. This ensures the highest strength and quality for maximum control and peace of mind.
Raises riser mounting location 2-3/8"
Sets riser mounting location towards rider 1-5/8"
Hardware is supplied, including:
2 x 7/8" integral chromoly bushing/nut
1/2"-13 thread size 1-1/2" Long, riser bolts.
Fitment: 2014 up to 2020 Road Glide models including the Road Glide Special, Road Glide Limited, and Road Glide CVO.
Made in U.S.A
Gauge housing will require cutting.*
Note* Fork Lock and Accessory features will not be functionally on your stock key switch. You can have your stock key switch mapped by your local dealership to function like the CVO model switch, which lets you use the accessory switch from your hand controls.

Kraus Raptor Plate
$226.00
Kraus Raptor Plate
The Raptor Pull Back Plate is for Road Glides. Bolt it to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5" so that you can mount any standard risers and they will clear the Gauges on 2014 up Road Glides. The Raptor Plate adds 2" of total height to the bar/riser on 2014 to present bagger. The Raptor Plate improves bar position when using Motocross style bars. We recommend running Kraus Isolated Risers with this setup for Vibration Damping. Holes will need to be cut in the bagger Nacelle for the risers to protrude or use our Billet Gauge Mount and get rid of that stock plastic Nacelle altogether.Please be aware that you will lose the Accessory and Fork Lock positions of the stock Key Switch. On CVO models the stock Steering Lock will interfere and cannot be used. Check with your local shop or dealership for options. Some bikes can be reprogrammed to not need the key switch at all with the Harley CVO Flash.The risers solid mount to the stock or aftermarket triple trees and the risers solid mount to the Raptor Plate.


Wolf One Billet Tree Touring
from $689.00
Wolf One Billet Tree Touring
Your top Tree Clamp is an essential part of a performance front end setup. The Wolf One Top Clamp has been engineered and designed with a broader cross section offering increased axial strength over the stock Harley Tree. The increased surface area of our wide body fork clamps offer positive hold of your forks giving you peace of mind that your Triple Tree setup will absorb the abuse of hard use.
Options:With Kraus Steering Lock (Our lock is only a manual steering lock, it does not control the ignition. You will need to relocate your electrical ignition switch or do a CVO flash and get rid of it completely)Without Kraus Steering Lock (You can run your stock key switch lock but it is ugly, bulky and will be exposed)
The Wolf One Top Clamp is intended for Road Glides and allows you to remove your stock plastic Nacelle to have a clean open look of an inverted front end.
Mounts directly to your stock 49mm forks.
Bolt your risers directly to the Wolf One Top Clamp or optionally run one of our Pullback Plates. (Kraus Steering Lock is not accessible with T-Rex Pullback Plate)
Works great with internal fork cartridge kits.
Machined from high quality American made solid billet Aluminum.
Available finishes include: Polished or Machine Black Anodized.

Alloy Art Gooden Tight
$55.95
Alloy Art Gooden Tight
If your upgrading your bikes handle bars on your bike and looking to get rid of the stock OEM rubber bushings. You cant go wrong with Alloy Art Gooden Tight!
Features:
Revolutionary design reduces vibration better than any other riser bushing on the market
Available for a wide variety of H-D models
Sold in sets of four
Made in the USA

Alloy Art Poly Riser Bushings
$38.95
Alloy Art Poly Riser Bushings
If your upgrading your bikes handle bars on your bike and looking to get rid of the stock OEM rubber bushings. You cant go wrong with Alloy Art!
Features:
Made from a new space-age polyurethane material
Eliminate sloppiness in handlebar and isolate vibration
Sold in sets of four
Made in the U.S.A.

Energy Suspension Poly Riser Bushings
from $30.00
$46.95
Poly Riser Bushings
Keep your bar set up tight without the rattle!
Features:
Quality Poly Urethane Material
Chrome Caps
Comes in Pairs


Speed Merchant Solid Bushings
from $48.95
$49.95
Speed Merchant Solid Riser Bushings For Harley
Stiffen up the feel of your handlebars with these solid riser bushings. Uses your stock riser hardware.
Features:
Available in black or polished finish
Made in the USA
Sold as a pair
Note: Does not include riser mounting bolts.


OEM Style Mirrors
$81.55
OEM Style Mirror
Looking for that blacked out look to customize your bike? These are just the ticket OEM replacement to get that blacked out look!
Features:
OEM Styling
Satin Black or Chrome
Comes with Spacer and Mounting Bolts

MoonsMC Qaurter Turn Throttle Tube
$54.99
Moons MC Qaurter Turn Throttle
Just bought a set of grips but not sure what throttle tube to use on your Harley? Our 1" throttle tube is made from CNC machined 6061 T6 aluminum and works great with any 1" aftermarket grips. This throttle tube also reduces the overall throttle rotation which allows the rider to go from cruise to full-throttle without having to re-grip from palm to fingers. Features Throttle by Cable 1" Bars 1/4 / Quick Turn Fitment 96-2010 HD Models with cable actuated throttle systems. You cant beat the MoonsMC Quarter Turn Throttle.
Features:
Throttle by Cable
1" Bars
1/4 / Quick Turn
Fitment


G2 Ergonomics 3/4 Throttle
$61.95
G2 Ergonomics 3/4 Throttle
Looking to get to where you’re going quicker? Want to run some grips that don’t cost a bunch of money? This is the Tube For you!
Features:
Made of Hardened ABS Plastic
Fits all 1 Inch Sleeve Free Grips
Use with Stock Throttle and Idle Cables
Fits 1in Diameter Bars

Smooth Top Clamp
from $20.35
Smooth Top Clamp
Smooth and Blacked out top clamp for your bar set up!
Features:
OEM Styling
Gloss Black or Chrome
1in Diameter
Comes with Black Bolt Covers


Thrashin Handlebar Clamp
$59.95
Thrashin Handlebar Clamp
Features:
6061 aircraft-grade billet aluminum
For use with most 99-19 Harley-Davidson models with 3-1/2" on-center risers and offset mounting holes
Made in the U.S.A.