Risers

TMF Signature Risers Our TMF Signature Risers are made from  6061 Aluminum and come with American Made stainless polished hardware.  Made right here in the Bay Area with pure style and function in mind. Available multiple sizes 6/8/10 as well as in straight or pull back. Gloss black powder coat and chrome finishes. Features: Fits on all models with 3.5" center on center  Works with any standard 1" handlebar Pull Back Risers feature 1.5" off Pull Back Sold in pairs with top clamp and 8 Polished SS Hardware  Base hole tapped for standard 1/2 " x 13 mounting bolts  Made in the U.S.A.

Bung King 1 Piece Lower Riser One piece lower riser that works with most stock OEM Harley top clamps and speed mounts. They can be drilled to accept internal wiring and are a staple for classic looks and styling. Features: Made of Mild Steel and Power Coated Gloss or Satin Black Tapped to Accept ½-13 Stock Riser Bolts Accepts 1in Handle Bars Custom Sizes Available Proudly Made In Campbell CA

Bung King Dyna Softail 1 Piece Risers These are a one piece lower riser made specifically for the 2018 Street Bob and similar models with the digital gauge as part of the riser clamp. Multiple heights are available, as well as the option to have them drilled for internal wire. Made from steel for extra strength with a one piece lower clamp to reduce the twisting usually seen with taller risers. Features: Made of Mild Steel and Powder Coated Gloss Black Tapered to Accept ½ x 13 Bolts on the Bottom Side Accepts Factory Upper Clamp and 1in Diameter Bars 1- ¼ Diameter Uprights Available in Custom Sizes Sold Ea Allow 1-2 Weeks Shipping for Custom Sizes

Thrashing Supply Risers Be proud of what you put on your bike. At Thrashin Supply Co. we strive to build the best parts, without cutting corners, right here in the United States of America. Our Thrashin Supply Risers are made of Domestic 6061 Aluminum and paired with ARP Hardware. Our black finish is a hard anodized black with a Anti-Fade agent while our chrome finish is triple nickel plated (known as triple chrome) to withstand severe weather conditions, so our risers stay looking fresh for years to come. All of our top clamps are angled at 35 degrees whether your choose a pull back or straight riser. This gives our risers a stylish look and feel as well as making the new M8 Gauges read perfectly for the rider at any height. Features: Fits on all models with 3.5" center on center riser spacing most OE Harley-Davidsons Works with any standard 1" handlebar, Top upper clamp bolts are 4.25 center on center Pull Back Risers feature 1.5" off Pull Back Sold in pairs with top clamp and 4 ARP Hardware included 5/16-18 x 1" Base hole tapped for standard 1/2​" x 13 mounting bolts (Bolts not included)(STANDARD SIZE) Made in the U.S.A.

Thrashin Supply Risers With Gauge Cutout For Harley Be proud of what you put on your bike. Thrashin Supply Co. strives to build the best parts, without cutting corners, right here in the United States of America. Thrashin Supply Risers are made of Domestic 6061 aluminum and paired with ARP hardware. The black finish is a hard anodized black with an anti-fade agent added while the chrome finish is triple nickel plated (known as triple chrome) to withstand severe weather conditions, so your risers stay looking fresh for years to come. Top clamps are angled at 35 degrees whether you choose a pull back or straight riser. This gives the risers a stylish look and feel, as well as making the M8 gauges read perfectly for the rider, at any height. Features: For 1" diameter handlebars  Risers are 3 1/2" center to center spacing Top upper clamp bolts are 4 1/4 center to center Pull Back Risers feature 1 1/2" of pull back Sold in pairs with top clamp and 4 ARP Hardware included (5/16-18 x 1") Base hole tapped for standard 1/2​" x 13 mounting bolts (bolts sold separately) Made in the USA

Kraus Isolated RisersKRAUS has developed the solution for bad handling, sloppy bars.The Isolated Riser Bar Clamp is designed to offer a solid secure mount, and vibration damping, solving the problem of unwanted handlebar movement.The Isolated Risers house vibration dampening rubber bushings in the clamp body, directly below your handlebars. The proprietary use of these rubber isolators take the vibration out of the bars but do not allow excessive movement caused by leverage like traditional OEM rubber mounted bar setups. Isolated Risers are mounted to your top triple tree using the provided solid bushings. With a stronger, solid connection to your front suspension, you have more control. Running Isolated Risers allows precise input into steering, enhances control and dissipates vibration in your bars and hands.

Kraus Kickback Isolated Riser Increase comfort and control with Kickback Isolated Risers. The Kickback moves the bars 1.5" towards the rider. Kickback risers utilize our Isolated Riser technology while increasing overall structural solidity with a one-piece Kickback center section. The entire riser unit is designed to offer the most solid secure mount, while still retaining vibration damping, solving the problem of unwanted handlebar movement. The Isolated Risers incorporates vibration dampening rubber bushings in the clamp body, directly below your handlebars. The proprietary use of these rubber isolators take the vibration out of the bars but do not allow excessive movement caused by leverage, like traditional OEM rubber mounted bar setups. With a stronger connection to your front suspension, you have more control. Running Isolated Riser Clamps allows precise input into steering, enhancing control. Handlebar clamping area is 1⅛" for MX style bars or 1" for traditional OEM Harley and aftermarket bars. Features: The secure feeling of a rigidly mounted handlebar but without the vibration. Bar Clamp has an opening to accommodate hidden wiring. Choose bar clamp for 1⅛ Moto bars or traditional 1" bars. Bushing life is increased for less maintenance. 3.5” on center for standard OEM Harley fitment. Ships with 1 solid riser bushing set. measured from the bottom of the riser to the middle of the bar clamp

Forbidden Risers If you’re going with a MX Bar and Riser combo on your bike, Forbidden Motorcycles is the originator. Forbidden Risers are the original 1 1/8 riser, you cant beat the look and performance. Features: Quality T6 Aluminum T6061 Aluminum  Pre-Drilled for Internals One Piece Top Clamp 9"/11" With or Without Gauge Tabs Black or Raw

Forbidden Risers FXBB If you’re going with a MX Bar and Riser combo on your bike, Forbidden Motorcycles is the originator. Forbidden Risers are the original 1 1/8 riser, you cant beat the look and performance. Features: Quality T6 Aluminum Keep HUD Gauges T6061 Aluminum Pre-Drilled for Internals One Piece Top Clamp 9"/11" With or Without Gauge Tabs Black or Raw

Sly Fox Riser Kits Features: Made with 6061-T6 Aluminum 1" clamping area 3-1/2" center-to-center riser spacing Top clamp and hardware included Made in the U.S.A.

Arlen Ness Kick Back Method Riser 10" Features: CNC-machined from billet aluminum Engineered to increase the rigidity and stability of the handlebar Includes hardware

Performance Machine PhatBar Handlebar and Riser Kits Features: Comes complete with a fly-by-wire ready aluminum handlebar and a billet riser set that mount to most Harley Davidson models Bar features an 1-1/4" clamping area tapered down to 1" to accommodate stock hand controls without any modifications Bar made from 7050-T6 aluminum with a 3” rise and slots for internal wiring Risers feature a 9” rise and are made from 6061-T6 billet aluminum Compatible with cable throttle and electronic throttle applications

Bung King Bagger Risers These risers are made specifically for the 2013 to present Road Glide models. The wider base width of the riser allows installation without modifying the factory trim panel, and a view of your gauges without two uprights cutting through the center of them like a traditional riser or t-bar. The base of the riser features welded in bungs, and because the two uprights are tied together it helps make them feel very rigid and reduce the possible twist seen on taller traditional risers. The upper clamp section is the same bolt pattern as the standard HD clamp and has a 1" bore to fit All style riser bars. The risers are drilled to accept internal wire, holes at the top are 1" below the clamping surface. Allow 1-2 weeks for delivery. Gloss Black Powder Coat! Features: Made of Mild Steel and Power Coated Gloss Black Tapped to Accept ½-13 Stock Riser Bolts Accepts 1in Handle Bars Custom Sizes Available Proudly Made In Campbell CA

Thrashin Holeshot Risers Features: Billet 6061 aluminum Drilled with 1/2" hole for internal wiring Works with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Base hole tapped for standard 1/2" x 13 mounting bolts (bolts not included) Fits on all models with 3.5" center on center riser spacing, including most OE Harley-Davidsons Made in the U.S.A.

Biltwell Murdock Risers Murdock risers feature investment-cast steel top clamps and lower threaded bases, and are connected by two 1-inch O.D. x 0.120” (3mm) wall seamless 4130 chromoly tubes. After TIG welding the finished unit is hand polished and triple chrome or satin black plated for style and durability. Features: Full TIG Welded Chromoly Hand Polished Triple Chromed or Satin Black 1in OD Uprights Fits OEM Trees Fits OEM Gauge Brackets ½-13 Threaded holes on Mounting Base