

Horsepower Inc MaxFlow Throttle Bodies 01-05 Twin Cam
from $859.95
Horsepower Inc MaxFlow Throttle Bodies
Includes throttle body, CNC ported intake manifold, throttle cable bracket, intake flanges and seals
Flow bench-tested and dyno-proven to deliver increased airflow, horsepower and torque
Brass throttle blade resists deflection, which helps maintain throttle position accuracy
Equipped with a sealed double roller bearing for smooth throttle operation
Compatible with all factory OEM electronics, including cruise control
Fully machined and ported internally for unparalleled flow
Stock bolt pattern and air cleaner opening
Made in USA


Horsepower Inc MaxFlow Throttle Bodies 06+ Twin Cam
from $859.95
Horsepower Inc MaxFlow Throttle Bodies
Includes throttle body, CNC ported intake manifold, throttle cable bracket, intake flanges and seals
Flow bench-tested and dyno-proven to deliver increased airflow, horsepower and torque
Brass throttle blade resists deflection, which helps maintain throttle position accuracy
Equipped with a sealed double roller bearing for smooth throttle operation
Compatible with all factory OEM electronics, including cruise control
Fully machined and ported internally for unparalleled flow
Stock bolt pattern and air cleaner opening
Made in USA


S&S Cable Operated Throttle Hog Throttle Bodies
from $859.95
$877.95
S&S Cable Operated Throttle Hog Throttle Bodies
Features:
Requires throttle body specific Stealth air cleaners (available separately) for 58mm and 66mm bodies
Sealed, stainless steel throttle shaft with dual roller bearings for smooth operation and no air leaks
One-piece throttle body/manifold design for easy installation and stock appearance
Compatible with stock sensors, fuel rail and throttle cables
Throttle bodies include hardened steel flanges and seals
Black powder coat finish matches stock
More air flow for improved performance
Made in the U.S.A.
Some S&S heads have additional material on the manifold surface to allow the use of a stock length manifold (405) on a 124" engine. If you are not sure which manifold should be ordered, check fitment with the stock manifold first.

S&S Manifold 55MM 17+M8
$203.95
S&S Manifold 55MM 17+M8
Features:
Replaces stock, plastic manifold
Must have for big bore engines
Includes new rubber seal
High-Flow, adds 3-5 hp
Easy to install
T6 heat treated cast aluminum
For closed course competition use only. Not intended for street use. Legal in CA only for racing vehicles which may never be used, or registered or licensed for use, upon a highway. Not legal for sale or use nationwide on any federal pollution controlled motor vehicle under the clean air act.
For closed course competition use only. Not intended for street use. Legal in california only for racing vehicles which may never be used, or registered or licensed for use, upon a highway. Not legal for sale or use nationwide on any federal pollution controlled motor vehicle under the clean air act.


Daytona Twin Tec Fuel Injectors
from $283.95
Daytona Twin Tec Fuel Injectors
Features:
Detailed test report included with each set
Made using the latest injector technology
Made in the U.S.A.


Feuling Parts Injectors
from $97.95
Feuling Fuel Injectors For Harley
Quality OEM replacements and upgrades.
Features:
EV-1 Minitimer square connectors
Flow rate in "grams per second"
Sold individually
6.2 gps Injector Info:
High-Flow Yellow band
Delivers 6.2 gps through single 15* spray hole
Recommended for mild to medium performance engines making over 110hp at the rear wheel
Also fits XL and V-Rod applications where an extreme high flow rate is needed
4.3 gps Injector Info:
For models with OE 46mm, 50mm, or Screamin' Eagle 43mm throttle bodies
Delivers 4.3 gps through 4 spay holes
Recommended for stock to mild performance engines under 90hp at the rear wheel
Replaces OEM 27609-01B
5.7 gps Injector Info:
For Screamin' Eagle 58mm throttle body
Provides 23% more fuel than OE injector
Delivers 5.7 gps through 4 spray holes
For race applications only with performance engines making over 100hp at the rear wheel
Replaces OEM 27617-08
5.3 gps Injector Info:
High-Flow Red band
Recommended for mild to medium performance engines making over 95hp at the rear wheel
Also fits higher performance XL applications where higher flow rate is needed
Replaces OEM 27796-08
3.8 gps Injector Info:
For stock to mild performance engines
Replaces OEM 27706-07/A
5.1 gps Injector Info:
For stock to mild performance engines
Delivers 5.1 gps through 6 spray holes
Replaces OEM 27665-01/A
8.2 gps Injector Info:
For race applications only
Note: Not C.A.R.B. approved


S&S Cycles CNC Ported Intake Manifold M8 55mm
$322.99
S&S Cycles CNC Ported Intake Manifold M8 55mm
Features:
Textured finish encourages fuel dissipation and atomization, Fits all 55 mm throttle bodies, Works with stock and ported heads , Includes intake seals, Made in the USA


S&S Cycles Intake Manifold M8 55mm
$214.95
S&S Cycles Intake Manifold M8 55mm
Textured finish encourages fuel dissipation and atomization, Fits all 55 mm throttle bodies, Works with stock and ported heads , Includes intake seals, Made in the USA