Lighting Accessories

Replacement Tail Light Base Need that tail light base to finish your full fender swap.. here it is! We have them in black and chrome to add the finishing touches to your bike! Circuit board optional but needed if you don't not have a base stock! Features: Direct OEM Replacement Brass Fittings for Mounts Full Working Circuit Board

Ditch that ugly stock chrome bezel and upgrade to our plug and play blacked out tail light bezel!  The fitment is perfect with any of our tail lights, so no issues with water getting in!FeaturesPCB / Circuit BoardLifetime WarrantyReplaces HD Part # 68296-99AFitment1999-2017 HD Models

Ditch that ugly stock chrome bezel and upgrade to our blacked out tail light bezel for Softail M8 bikes!  The fitment is perfect with our Low Profile V3 tail lights. FeaturesLifetime WarrantyHigh Gloss BlackPCB / Circuit Board Included Fitment2018-2022 Softail M8 Models (FXLR, FXLRS, FXLRST)

The MOONSMC® Turn Signal Lens Kits replace the amber lenses in the front, and the red brake / blinker pods in the rear for a clean appearance. These look great with our MoonPod V2's!Features Harley OEM #69304-02Snap-on assemblyNo tools requiredDOT ApprovedComes with 4

The MOONSMC® Turn Signal Lens Kits replace the amber lenses in the front, and the red brake / blinker pods in the rear for a clean appearance. These look great with our MoonPod V2's!Features Harley OEM #69304-02Snap-on assemblyNo tools requiredDOT ApprovedComes with 4

MOONSMC® Pancake style Turn Signal Lens for Baggers Comes as a pair FeaturesClear or SmokedFitmentHarley Electra GlideRoad King HeritageSoftail

FeaturesCompatible with any MOONSMC 5.75 sized headlightsComes with the headlight ring, nut, and boltEasy installationGloss black finishPre-wired harness to fit a standard H4 headlightAvailable with the 2018+ Softail M8 4 pins DELPHI headlight adaptorUniversal fit If you have an FXLRS, you will need our new headlight block!  

Replacement Tail Light Screws Made in the U.S.A. Fits 99-21 Models with Eraser Style Light  OEM Replacement 

Looking to run one of our 6 inch light bars on your new Softail FXLRS and or FXLRST?  Our bracket bolts right up to the lower triple tree making it simple to install any of our 6 inch light bars!FeaturesCNC Machined / Billet 6061 AluminumStainless Steel Hardware IncludedHard-Anodized Black Fitment2020 - Current FXLRST / FXLRS Install Note Please make sure to use loctite on all the hardware for the light bar and bracket so it does not get loose and either falls off and or hits the fender.  We are not responsible for any damage which you may incur.  Note - This does not work with our Dual Beam light bars.

The MOONSMC® LED light bar bracket is made from CNC machined 6061 aluminum and is very solid making it a clean, simple install for any size LED light bar. The bracket was designed to be installed on the lower triple tree to the bracket which holds the front brake line in place.FeaturesStainless Steel Hardware IncludedCompatible with 4", 6" and 7" Light BarsSlotted For Adjustability

7" inch MOONSMC® Round LED Headlight Mounting Ring for Harley-Davidson BaggersFeatures Made from Steel7" LED headlight mounting ring for Harley DavidsonMounts the light into the headlight firmlyBuilt-in springs to relieve riding vibration and also adjust the level of the headlight  FitmentFits any Harley Davidson models with 7" headlight

Converts H13 connector to H4 connector on halogen style headlights Fits Harley Fatbob's and other H13 type headlight connectorsRated for 55 Watt/60 Watt headlightsComes as a PairAlso Fits 2007 - 2016 Jeep JK Wrangler

Fitment'18 - Later M8 Softail'14 - later Touring Replaces Part #69200897

The MOONSMC® adapter turns the factory H9/H11 connectors into a female H4 plug for quick and easy install of our 7" Moonmaker LED headlights! Simplify your headlight installation without the need to splice any wires. Features Plug and PlayConverts H9/H11 connector into female H4 plug  Fitment HD CVO Road King '14-'21 HD Road King '14-'21HD Street Glide '14-'21 HD Street Glide Special '14-'21

Having an issue with hyper flash on your turn signals after upgrading to LED turn signals and or our Low Profile LED tail light with integrated turn signals? The MOONSMC® Load Equalizer fixes the hyper flash issue with no load and or heat on the charging system. Only one module is needed per bike which covers both the front and rear turn signals. FeaturesPlug & Play InstallationWaterproofNo LoadAlarm CompatibleLifetime Warranty FitmentPlug and Play on the following bikes below:1997-2011 Dyna®1999-2003 Sportster®1996-2010 Softail®1997-2013 Baggers1997-2009 Road Glide Standard2006-2009 Street Glide The following models DO NOT require a Load Equalizer2011-2018 Softail®2012-2018 Dynas®2014-2018 Touring2014-2018 Sportster®