

Starter Jackshaft Kits
from $16.27
Starter Jackshaft Kits
Features:
One-piece design jackshaft assembly delivers more torque to the primary and is more tolerant of misalignment problems, all for less money than stock jackshaft assemblies
Replace the existing shaft, couplings and pinion gear (53/8?" long)
Include jackshaft, starter shaft bolt, spring, washer, seal and snap ring
Replacement seal PART #DS-174342 available separately


Terry High Output Slugger Starter
from $440.95
$565.95
Terry High Output Slugger Starter
This 1.8 kw High Torque Starter, offers superior windings, high tolerance heavy duty clutch, and a thicker commentator that resist flying shorts. Static balanced for smoother operation, it has the torque to start any monster motor with the least amount of amperage drain. The low profile design will clear the electronic speedometer for easy installation. Available in wrinkled black.
Features:
Starters are assembled in the U.S.A. with heavy-duty components and tested with state-of-the-art equipment.
Starter offers superior windings, high-tolerance heavy-duty clutch and a thicker commutator that resists flying shorts
Static balanced for smoother operation
Low-profile design will clear the electronic speedometer sensor for easy installation
Made in the USA


Drag Specialties Starter Solenoid Kit
from $30.55
Drag Specialties Starter Solenoid Kit
Upgrade your Harley Davidson with the DRAG SPECIALTIES Starter Solenoid Kit, Part Number 79-1102. This comprehensive kit includes essential contacts and gaskets to ensure compatibility with all models, providing reliable performance and durability. Perfect for those looking to maintain or enhance their motorcycle's electrical system.
Features: * Includes contacts and gaskets for all models * Designed specifically for Harley Davidson motorcycles * Ensures reliable starting performance * Easy installation for quick upgrades * Durable construction for long-lasting use


Terry Solenoid End Cover Starter Buttons
$145.95
Terry Solenoid End Cover Starter Buttons
Features:
Beautiful T-6 billet aluminum replaces the OEM end cover
Can be used as primary or auxiliary starter button
Install in just minutes with OEM hardware
Made in the U.S.A.


Drag Specialties End Cover Starter Buttons
from $58.95
STARTER BUTTON GLOSSBLACK
SOLENOID END COVER/STARTER BUTTONS
Constructed from aluminum with a chrome finish
Replace the solenoid end cover and include mounting screws
Fit most 99-17 Big Twin and 91-20 XL OEM and aftermarket starter motors


Drag Specialites Replacement Starter Rings
from $99.91
Drag Specialites Replacement Starter Rings
Features:
OEM-Replacement starter ringsĀ
High-quality steel construction

Terry Components Starter Output ShaftGear
$38.95
Terry Components Starter Output ShaftGear
Features:
Quality OEM replacement gear for late starter clutches
Fits 06 Dyna and 07-17 Twin Cam Models
Made in the USA


Terry Starter Drive Clutches
$139.95
Terry Starter Drive Clutches
Features:
Comes complete with bearings and drive clutch
Available for high-performance or OEM starters
Sold Each


Drag Specialties Starter Clutches
from $82.57
Drag Specialties Starter Clutches
Features:
High-quality components to repair common failures of OEM Harley starters
Clutches with bearings and spring are available for most models; PART #2110-0319 includes bearing and pinion gear


Spyke SuperTorque Starters
from $504.13
Spyke SuperTorque Starters
Features:
Give your bike up to 46% more cranking torque compared to stock with intelligent gear-reduction design
1.4kW starters perform well without the use of a high-amp battery
Easy installation
Made In The USA


Terry Starter Motors
from $463.95
Terry Starter Motors
Features:
Nippondenso starters are assembled in the U.S.A. with heavy-duty components and tested with state-of-the-art equipment
Solenoid plunger, return damper and springs are replaced with stronger components
Clutch shaft and rollers are replaced with precision-ground and hardened parts for longer service life
All components are assembled with a special lube for starter roller clutch applications
CNC-machined billet mounting noses are held together with aerospace fasteners
After assembly, all starters go to a dyno test including hi-low voltage, stall torque, solenoid engagement, amperage draw, load test, maximum rpm and motor impulse wave form
Made in the U.S.A.