Best Selling Products

Thrashing Supply Brake Arm 14-22 Touring Models Makes the brake position more comfortable by eliminating harsh ankle angles when braking Allows for up to 12° of rotational adjustment, Made in the U.S.A.

CNC machined from billet aluminum Compatible with ABS brake systems Designed and engineered to be extremely rigid and perform consistently in all braking scenarios Cooling fins are CNC machined into each side of the inner caliper to disperse heat Front calipers available for 11.8" brake rotors Rear caliper kits include CNC machined billet caliper bracket and necessary hardware

6-piston brake calipers CNC machined from billet aluminum. Features caliper bodies that are engineered for form and function, 3D sculptured design helps facilitate cooling incurred while braking. Designed and engineered to be extremely stiff under stress ensuring precise and consistent braking performance. Cooling fins machined into the inner caliper halves help disperse heat.

Galfer Cubiq Rotors Features: Named after the crystal steel molecules, the Cubiq brake rotor combines state-of-the-art technology with modern design Rotor shape promotes uniform brake pad wear the contact surface between the pad and disc every revolution generates regular wear Less unsprung weight (up to 40% lighter than standard round rotors) reduces gyroscopic effect and improves the manueverability of the motorcycle Increased perimeter surface design generates more cooling surface around the rotor for better temperature dissipation

Arlen Ness Caliper Bracket Features: Relocates factory brake calipers to proper position for use of 14" brake rotors Available for single and dual disc applications Includes necessary hardware

Cycle Electric Alternator Kits Features:  Kits include stator, rotor, black rectifying voltage regulator and mounting hardware Made in the U.S.A. Adding electrical accessories increases amperage usage. When doing so, it is important to consider amperage ratings of switches and wires. If you draw too many amps through a switch or wire, it will heat up and may burn. Fuses and breakers are sized to protect wiring and switches. DO NOT CHANGE 30A MAIN BREAKER TO A 50A BREAKER. THE SWITCHES AND WIRING WILL NOT BE PROTECTED.

Cycle Electric 3 Phase 38A Charging Kits Features: Get more power out of a smaller stator Kits deliver 17A at 1,000 rpm and 38A at 2,500 rpm Made in the U.S.A.

Drag Specialties Master Cylinders Rebuild Kits Features: Meets or exceeds OEM specifications Direct Replacement for OEM

Drag Specialties Front Brake Master Cylinders Features: Kits include master cylinder assembly, clutch lever assembly, die-cast switch housings with radiused edges and OEM-style clamps Available with or without switches Kits accept OEM-style switches only Master cylinders accept OEM-style rebuild kits NOTE: Not for use on models with cruise control.

EZ Install Kit  Features: Kits include only what you need to install handlebars Install in roughly half the time of other kits Made in the U.S.A. Kits do not replace existing lines and cables

Magnum Quick Connect Braided Upper Clutch Cables Features: Braided upper clutch cables economically replace the OE upper cable section Easily and quickly connects to the existing lower cable section Significantly reduces installation time, plus there's no need to drain transmission fluid Unique design reuses OE cover and housing parts Braid color and weave match on all Magnum control cables and brake lines Crystal clear outer jacket will never discolor and provides exceptional protection against scuffing paint and chrome Low effort, high efficiency cable design meets or exceeds OE specifications for fitment, construction and endurance Made with anti-friction inner liners and factory lubricated for smooth, consistent and long-lasting operation Assembled in the U.S.A.

PowerMadd Star Series Hand Guards Features: Engineered to provide the ultimate in hand protection against the elements Allow the rider to wear thinner gloves for more control while still keeping hands warm Fully adjustable mounting system allows for a variety of positions to fit the rider's needs A great way to add that racer look while providing excellent wind protection Provide coverage against roost and flying debris Universal mounting system for simple installation Handguards and mounting system are sold separately

Thrashin Supply Riser Spacer Kit Features: Made specifically to fit Thrashin Supply Risers Increase your Thrashin Riser length with these spacers Constructed of 6061 billet aluminum Made in U.S.A. Comes with hardware - 3-1/4" long, grade 8 steel, 1/2"-13 thread type (same as risers), zinc yellow-chromate plated head screw and grade 8 washer to match

Sly Fox Riser Adpaters Feature: T-Bar adapter Made From 6061 T6 Aluminum  Allows for Mounting of Tall Risers or T-Bars While Leaving Gauges in the Stock Location 3.5in Center to Center Mounting Holes  Made in the USA