Newest Products

Feuling Parts Crankshaft Bearing Race Kits Features: Kit includes right and left side crankshaft races with the left side thrust washers These Feuling press on races have a precision ground outer diameter finish and are designed to be true to size producing the correct OD after proper press on installation

Timken Left Side Bearing and Shims Quality equals or exceeds OEM specifications Made in the U.S.A.

S&S Super E and Super G Carb Kits Features: Super E has a 1-7/8" throat at the butterfly and a 1-9/16" venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch If there is a doubt as to which carburetor to use, we suggest the 1-7/8" Super E Each carb kit includes an S&S Super E gas carburetor S&S Super E carburetors require the use of a two-cable, pull open/pull close throttle assembly

Daytona Twin Tec Fuel Injectors Features: Detailed test report included with each set Made using the latest injector technology Made in the U.S.A.

Feuling Fuel Injectors For Harley Quality OEM replacements and upgrades.  Features: EV-1 Minitimer square connectors Flow rate in "grams per second" Sold individually 6.2 gps Injector Info: High-Flow Yellow band Delivers 6.2 gps through single 15* spray hole Recommended for mild to medium performance engines making over 110hp at the rear wheel Also fits XL and V-Rod applications where an extreme high flow rate is needed 4.3 gps Injector Info: For models with OE 46mm, 50mm, or Screamin' Eagle 43mm throttle bodies Delivers 4.3 gps through 4 spay holes Recommended for stock to mild performance engines under 90hp at the rear wheel Replaces OEM 27609-01B 5.7 gps Injector Info: For Screamin' Eagle 58mm throttle body Provides 23% more fuel than OE injector Delivers 5.7 gps through 4 spray holes For race applications only with performance engines making over 100hp at the rear wheel Replaces OEM 27617-08 5.3 gps Injector Info: High-Flow Red band Recommended for mild to medium performance engines making over 95hp at the rear wheel Also fits higher performance XL applications where higher flow rate is needed Replaces OEM 27796-08 3.8 gps Injector Info: For stock to mild performance engines Replaces OEM 27706-07/A 5.1 gps Injector Info: For stock to mild performance engines Delivers 5.1 gps through 6 spray holes Replaces OEM 27665-01/A 8.2 gps Injector Info: For race applications only  Note: Not C.A.R.B. approved

S&S Cable Operated Throttle Hog Throttle Bodies Features: Requires throttle body specific Stealth air cleaners (available separately) for 58mm and 66mm bodies Sealed, stainless steel throttle shaft with dual roller bearings for smooth operation and no air leaks One-piece throttle body/manifold design for easy installation and stock appearance Compatible with stock sensors, fuel rail and throttle cables Throttle bodies include hardened steel flanges and seals Black powder coat finish matches stock More air flow for improved performance Made in the U.S.A. Some S&S heads have additional material on the manifold surface to allow the use of a stock length manifold (405) on a 124" engine. If you are not sure which manifold should be ordered, check fitment with the stock manifold first.

Thrashin Bagger Floorboards Features: 6061 aircraft-grade billet aluminum Complete knurl board for better grip and control Made in the U.S.A. Models with passenger footpegs will require the use of OEM accessory floorboard mounts

Thrashin Mini Floorboards Features: 6061 aircraft-grade billet aluminum Stainless steel clevis Fits male-mount footpeg supports Made in the U.S.A.

Flo Mini Floor BoardsFloorboard style Foot Pegs from Flo Motorsports.  Features: Machine from 7075 T6 Aluminum 5 x 3.5in Wide 360 Degree Adjustability          

Chris Rivas Rocket Cams Big Bore Cylinder Kit There is no replacement for displacement' is the mindset we have lived by for over 25 years in the v-twin industry.Rocket cams is proud to introduce their high quality and durable cylinder and piston big bore kits, with all components made right here, in the usa! the cylinders are casted from premium materials and perfectly fitted and matched to their paired up wiseco pistons sets.Rocket cams cylinders come power coated textured black with machine fins, for a perfect blend to an oe harley motor.All kits come with cometic head and base gaskets and are ready for install.This ultimate combination of industry leading manufacturers and experienced racers, will bring bolt on horsepower to a new level.See the chart below for our cam and component suggestions to get the best results and customer satisfaction. Features: M8 128" CYLINDER KIT Brings stock M8 114" and 117" motors to 128" 4.5" Stroke and 11:1 Compression Wiseco forged pistons with coated skirts .040 head gasket set M8 124" CYLINDER KIT Brings stock M8 107" motors to 124" 4.375" Stroke and 11:1 Compression Wiseco forged pistons with coated skirts .030 head gasket set TWIN CAM 110" CYLINDER KIT Brings 07-16 stock 96" and 103" motors to 110" 4.375" Stroke and 10.5:1 Compression Wiseco forged pistons

Locezy Saddlebag Theft Deterrent Kit Features: Saddlebag theft deterrent system Secure your saddlebags Lock and retaining washers Replacement U-clips EasyTurn threaded knobs

FLTR Gauge Housing 15+  Features: Reproduction of OEM gauge housing Works with stock and most aftermarket gauges Unpainted ABS from precision molds