Newest Products

Product Description Complete the look and feel of your foot controls by combining the Max Lean Floorboards with the Max Lean Mini Floorboards to get the most style and comfort out of your Harley. The Max Lean Mini floorboards are designed and engineered to be used with a variety of different Harley-Davidson models. Additional applications include highway pegs, passenger pegs, or as your main foot pegs. Get the most adjustability by adding the Pro-Line Peg Adjuster. Sold in pairs Fitment Universal HD Fits models with H-D male mount footpeg supports. Passenger location on 14 and Up Touring Models Softail up to 2017 Dyna FXR Sportster NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description Ambitious riders need comfortable Harley floorboards that inspire confidence. And confidence is control. The Kraus Max Lean Floorboards are engineered to sit closer to the rider’s center of gravity than stock floorboards. Their aggressive design leaves the rider feeling completely planted at pace, while the kickback heel and tapered edge allow huge lean angles. Because no two riders are identical, width and pitch are fully adjustable, creating the best Harley custom floorboards available. Features 100% made in the USA 1" higher and 2” back from stock position for a mid-control feel Adjustable mounting for pitch angle and stance width Kicked back heel for a more aggressive stance Tapered edge for greater lean angle Aggressive grip to keep your foot planted Lightweight, high strength billet aluminum Offered in black anodized or machine finish Add the Max Lean Foot Control Kit - the ultimate cockpit setup for your feet. Fitment: 2006 and Up Harley-Davidson Touring models. Replaces OEM assemblies 50683-04, 50688-04 2023+ CVO models will require Harley PN: 50674-05 (x4) Screws 2024+ CVO Road Glide ST models require additional Harley PN: 47200302A (x2) Front Floorboard Mounts NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description The Kraus Pro-Line Slider Derby Cover is a direct replacement for your stock derby cover. This isn't your normal dress up cover. It has a Delrin Slider so when you're deep in that left hand corner you're not going to lay pavement scratches across your primary. Comes with a replaceable Delrin slider to protect your primary. Fitment Fits ’16-later Touring and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438. All required Hardware included NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description The Kraus Pro-Line Slider Derby Cover is a direct replacement for your stock derby cover. This isn't your normal dress up cover. It has a Delrin Slider so when you're deep in that left hand corner you're not going to lay pavement scratches across your primary. Comes with a replaceable Delrin slider to protect your primary. Fitment Fits '18-later FLSB and '19-later Softail models. Also fits '18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043. All required Hardware included NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description The Kraus Pro-Line Slider Derby Cover is a direct replacement for your stock derby cover. This isn't your normal dress up cover. It has a Delrin Slider so when you're deep in that left hand corner you're not going to lay pavement scratches across your primary. Comes with a replaceable Delrin slider to protect your primary. Fitment Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna, ’99-'18 Softail (except FLSB) and ’99-’15 Touring models (except FLHTCUL, FLHTKL or ’07-’15 Touring with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438). All required Hardware included NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description This extension gives 1" of extra ground clearance on aftermarket Ohlins rear shocks. Made from 7075 billet aluminum Stackable to give up to 2" of extra clearance (Bagger will require modification to swingarm in order to stack two extensions) Sold in pairs Fitment Compatible with the following Ohlins Shocks: HD 044 HD 357 HD 762 HD 764 HD 764LE HD 765 HD 772 HD 776 HD 777 HD 779 HD 816 HD 817 54000193 (Screamin' Eagle/Ohlins Remote Reservoir Shocks) Call to confirm any additional fitments. NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description The Digital Gauge Bezel is a light weight billet aluminum housing for the M8 Softail Digital Gauge and other H-D model from support of KOSO D2.  The light weight Aluminum housing completely encloses your digital gauge and creates a clean finished look. Whether you use our Universal T-Bar Clamp Mount or Isolated Riser Top Mount, you can put your gauges exactly where you want them. Be sure to add a mount (Universal T-Bar clamp or Isolated Riser Top Mount), providing you even more flexibility with how you want your setup. Light Weight Aluminum construction Adjustable pitch Multiple mounting options to choose from. Offered in Black Anodized or Machine finishes All Billet Design. Light and compact. Fitment: OEM Harley Gauge All Harley Softail Models 2018 and up with the HD digital gauge. (Standard, Street Bob, Sport Glide, Lowrider ST) Most Softail applications will require an extension harness. KR-NSXH-3201 or 20-A91803A are available. KOSO Gauge For Baggers, Dynas, Sportsters, and Softail models we offer a gauge conversion with the Koso D2 meter. (Sold Separately) For Dyna's Sportsters and Pre-18 model Softails: See the model-specific product page. Most Softail applications will require an extension harness. KR-NSXH-3201 or 20-A91803A are available. 8"+ Risers for Bagger may require an additional extension harness (20-A91803A) IMPORTANT: the 5" version for the Kickback option is NOT COMPATIBLE with our Raptor or T-Rex Pullback Plates on bagger applications. NOTE: Koso D2 gauge and rubber gasket must be purchased unless bike is already configured with Harley Digital Style Gauge. If bike currently has OEM digital style gauge, Rubber gasket, hardware and gauge will be reused and installed in Kraus Digital Gauge Bezel. Mounting Options: T-Bar Clamps Use the Universal T-bar Riser Clamp option for the most adjustability. (1.25" clamps for Kraus Isolated Risers. 1.5" Clamps for Non-Kraus Brand aftermarket 1.5" risers/t-bars.) (T-bar Clamps are 3.5" on center and can be mounted in front or behind the risers/bars). For maximum adjustability add a 3" extension. Isolated Risers Top Mount Use this option for greatest visibility of gauge bezel. For maximum adjustability add a 3" extension. NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description The LUX Gauge Bezel has an aggressively styled and beautifully machined front face. Ditch your stock plastic gauge housing and clean up your Road Glide dash. This machined piece encases your stock Harley gauges and mounts in a variety of different ways. Whether you use our Universal T-Bar Clamp Mount or Isolated Riser Top Mount, you can put your gauges exactly where you want them. The rear mounting point allows you to adjust the position in an almost infinite range for optimum positioning and the perfect cockpit setup. Be sure to add a mount (Universal T-Bar clamp or Isolated Riser Top Mount) in the Build Your Kit section, providing you even more flexibility with how you want your setup. Redesigned front bezel improves the look and readability of your gauges Engineered with a rear mount to maximize placement options Made in the USA of American billet aluminum  Fitment Fits 2015-2023 Road Glide Stock Gauges The Kraus RG Billet Gauge Bezel can be paired with any of the following mounting styles T-Bar Clamps Use the Universal T-bar Riser Clamp option for the most adjustability. (1.25" clamps for Kraus Isolated Risers. 1.5" Clamps for Non-Kraus Brand aftermarket 1.5" risers/t-bars.) (T-bar Clamps are 3.5" on center and can be mounted in front or behind the risers/bars). All Billet Design. Light and compact. For maximum adjustability add a 3" extension. Isolated Risers Top Gauge Mount Use this option for greatest visibility of gauge mount. For maximum adjustability add a 3" extension. NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments. Downloads Install Guide

Product Description Small improvements can make a big difference.  The Kraus EZ-Shift changes your shifter’s leverage ratio so you can easily find Neutral, even at a dead stop.  Find neutral on M8 transmissions, at slow speeds Greater leverage makes smooth shifts across all gears Makes shifting 20% easier Enhances your riding experience Made in the USA of American billet aluminum EZ-Shift finds the right gear every time.  Use with stock shift or aftermarket levers, works great for short levers. Easily bolt it on in 5 min. Fits all M8 Baggers and Softails. Billet Machined from high grade material.  This small but effective component makes a big difference in your riding experience. Offsetting the shift location changes the ratio to create just a little longer throw on your toe lever. This smooths out the gear change, resulting in an EZ shift.  It’s a must have if you ride in cities or traffic, your left hand and clutch will thank you. Holding that clutch lever in continues to drag the clutch creating heat in the primary and motor. Your bike will run cooler and your clutch and fluid will last longer if you pop it into neutral at the light and release the clutch.  Not to mention trying to back the bike up in gear, having to kill the motor to get neutral… Don’t worry your buddies will wait for you. All necessary hardware for installation is included. For Twin Cams, see the fitment specific product page.  Must have OEM transmission arm PN: 33900175. Non OEM, straight style shift arms will not work NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments. Downloads Install Guide

Product Description Small improvements can make a big difference.  The Kraus EZ-Shift for H-D Twin Cams changes your shifter’s leverage ratio, so you can easily find Neutral—even at a dead stop.  Find neutral on Twin Cam transmissions, especially at slow speeds Greater leverage makes smooth shifts across all gears Makes shifting 20% easier Enhances your riding experience Easily bolts on in 5 min Made in the USA of high grade American billet aluminum EZ-Shift finds the right gear every time.  This small but effective component makes a big difference in your riding experience. Offsetting the shift location changes the ratio to create just a little longer throw on your toe lever. This smooths out the gear change, resulting in an EZ shift.  It’s a must have if you ride in cities or traffic, your left hand and clutch will thank you. Holding that clutch lever in continues to drag the clutch creating heat in the primary and motor. Your bike will run cooler and your clutch and fluid will last longer if you pop it into neutral at the light and release the clutch.  Not to mention trying to back the bike up in gear, having to kill the motor to get neutral… Don’t worry your buddies will wait for you. All necessary hardware for installation is included.FITMENT: Fits all H-D Twin Cam models.  For M8 Baggers and 18+ Softails, see the fitment specific product page.  Designed to fit OEM transmission arms only. Aftermarket will likely not work. (OEM PN's: 33849-97 or 33715-85A) NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments. Downloads Install Guide

Product Description These perch half clamps are the newest addition to the Kraus Pro-line product line. These Pro-Line Half Clamps are designed and machined to the Kraus high standards and offer a replacement to the Harley stock half clamps when running aftermarket bars. Keep a clean and precise look while securing the handlebar master cylinder and clutch control. CNC Billet Aluminum construction Fitment Not Compatible with 2023 CVO Models - Please call to confirm fitment Works with the FM Fly Moto Handlebar and the ODI Podium V-Twin/Moto Handlebar and early OEM HD bars. This is a universal fit part; it may or may not fit without modification. NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Barnett Derby Cover Clear Upgrade your Harley Davidson Touring with the BARNETT Derby Cover (Part Number 343-30-44015). This stylish and durable cover is designed to fit OEM primary covers on select Harley Davidson Big Twins from 2015 to 2023. Featuring a sleek black finish combined with a clear polycarbonate window, this derby cover not only enhances the aesthetic of your bike but also allows you to easily view your clutch. The window is built from scratch and discoloration resistant material, ensuring long-lasting clarity. A secure o-ring gasket seals the cover, and a derby cover gasket is also included for easy installation. Features: * Compatibility: Fits OEM primary covers on select Harley Davidson Big Twins from 2015 to 2023. * Material: Clear 0.25 inch thick polycarbonate window for optimal visibility of your clutch. * Durability: Scratch and discoloration resistant window ensures long-lasting clarity. * Seal: Sealed with an o-ring gasket for a secure fit. * Installation: Derby cover gasket included for hassle-free installation.