On Sale

Cycle Electric Alternator Kits Features:  Kits include stator, rotor, black rectifying voltage regulator and mounting hardware Made in the U.S.A. Adding electrical accessories increases amperage usage. When doing so, it is important to consider amperage ratings of switches and wires. If you draw too many amps through a switch or wire, it will heat up and may burn. Fuses and breakers are sized to protect wiring and switches. DO NOT CHANGE 30A MAIN BREAKER TO A 50A BREAKER. THE SWITCHES AND WIRING WILL NOT BE PROTECTED.

Cycle Electric 3 Phase 38A Charging Kits Features: Get more power out of a smaller stator Kits deliver 17A at 1,000 rpm and 38A at 2,500 rpm Made in the U.S.A.

Arlen Ness Two-Piece Floating Rotors Features: High performance floating brake rotors 420 stainless steel outer band cut and drilled for optimum performance and heat dispersion Inner carriers are CNC machined from aircraft quality billet aluminum

Drag Specialties Master Cylinders Rebuild Kits Features: Meets or exceeds OEM specifications Direct Replacement for OEM

Drag Specialties Front Brake Master Cylinders Features: Kits include master cylinder assembly, clutch lever assembly, die-cast switch housings with radiused edges and OEM-style clamps Available with or without switches Kits accept OEM-style switches only Master cylinders accept OEM-style rebuild kits NOTE: Not for use on models with cruise control.

EZ Install Kit  Features: Kits include only what you need to install handlebars Install in roughly half the time of other kits Made in the U.S.A. Kits do not replace existing lines and cables

Magnum Quick Connect Braided Upper Clutch Cables Features: Braided upper clutch cables economically replace the OE upper cable section Easily and quickly connects to the existing lower cable section Significantly reduces installation time, plus there's no need to drain transmission fluid Unique design reuses OE cover and housing parts Braid color and weave match on all Magnum control cables and brake lines Crystal clear outer jacket will never discolor and provides exceptional protection against scuffing paint and chrome Low effort, high efficiency cable design meets or exceeds OE specifications for fitment, construction and endurance Made with anti-friction inner liners and factory lubricated for smooth, consistent and long-lasting operation Assembled in the U.S.A.

Barnett Replacement Throttle/Idle Cables Features: Available with nylon-lined, PVC-coated casings Made in the U.S.A. Length of throttle and idle cables means length of outer housing only, excluding the elbows and/or adjusters.

Barnett Replacement Clutch Cables Features: Coated cables offer that custom look without the fear of damaging areas that the cables come in contact with Available in easy-pull high-efficiency design in standard diameters High-efficiency clutch cables reduce lever effort by up to 40% Made in the U.S.A.

Drag Specialties Replacement Clutch Cables Features: Low effort, maximum efficiency cable design meets or exceeds all OEM specifications for fitment, construction and endurance requirements Cables feature chrome-plated fittings, stainless-steel braided or black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth operation Braiding is coated with a non-yellowing clear coating for abrasion resistance High-performance cables use the latest technology of longitudinally winding the outer housing lengthwise rather than spirally so cable bends in a more natural arc and eliminates spring and compression Available in undersize/standard/oversize lengths for most models HOW TO MEASURE CLUTCH CABLES NOTE: Late-style cables are measured with the adjuster completely collapsed. NOTE: Adjuster measured from bottom of cable.

Drag Specialties Replacement Throttle/Idle Cable Features: Cables feature polished-chrome fittings, stainless-steel braiding or black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for smooth operation and long life Braided cables feature outer housings coated with a non-yellowing clear covering for abrasion resistance Available in undersize/standard/oversize lengths for most single and dual cable applications NOTE: Length given is the length of the outer housing only, excluding the elbow. NOTE: Cables will also fit late style Mikuni carbs.

PowerMadd Star Series Hand Guards Features: Engineered to provide the ultimate in hand protection against the elements Allow the rider to wear thinner gloves for more control while still keeping hands warm Fully adjustable mounting system allows for a variety of positions to fit the rider's needs A great way to add that racer look while providing excellent wind protection Provide coverage against roost and flying debris Universal mounting system for simple installation Handguards and mounting system are sold separately

Memphis Shades Handguards Features: Stylish wind protection for your hands Mounts are E-coated aluminum, guards are rubber isolated Made of Lucite®? in Ghost (almost clear with a very light black tint – 85% visible light transmission), and black opaque Ghost comes with polished mounting, Black opaque comes with black mounting hardware

Hart-Luck Signature V-Twin Slip-On Grips Features: Slim Moto design in 1” specific for V-Twin motorcycles Medium-compound full-waffle pattern reduces vibration Durable heavy knurled base pattern for improved traction and control Genuine proprietary materials provide excellent comfort and durability

Hart-Luck Signature V-Twin Lock-On Grips Features: Moto-inspired grip system specifically designed for your performance V-Twin Medium-compound materials provide excellent durability and comfort Full-waffle moto-pattern reduces vibration/provides improved grip in all conditions Heavily knurled base-pattern delivers solid traction and control Billet-aluminum clutch-side clamp ensures 100% slip-free security (eliminates the need for set-screws) T15 Torx bolts ensure extra-secure clamping for solid, twist-free mounting Proudly made in the U.S.A.