Products

FXR Brake Pedal Polished Alloy FXR brake pedal has a polished alloy finish and includes the bushings installed. *NOTE: Must order rod end wave washer cotter pin and the master cylinder which icludes the piston rod installed separately. *NOTE: Includes the clevis with pin. *NOTE: For FXR mid control applications.

FXR Chrome Dash Panel FXR dash panel features a die cast steel construction with a chrome finish. Openings are for the fuel gauge and speedometer. Decals included. Suggested to use with 52mm GPS speedometer and tachometers for replacement. *NOTE: 2-1/2 inch speedometer opening will require an adapter ring. Fitment Harley Davidson FXR 1982 Harley Davidson FXR 1983 Harley Davidson FXR 1984 Harley Davidson FXR 1985 Harley Davidson FXR 1986 Harley Davidson FXR 1987 Harley Davidson FXR 1988 Harley Davidson FXR 1989 Harley Davidson FXR 1990 Harley Davidson FXR 1991 Harley Davidson FXR 1992

FXR Electrical Panel Set Black Black flat left and offset right FXR electrical panel set. Panels mount by 1/4 inch-20 well nuts and 1/4 inch x 20 x 3/4 inch hex screws. The right side accepts a starter relay and 4 circuit breakers held on by pop rivets finished in black. The left side features a rectangle hole in the corner. Fitment Harley Davidson FXR 1986 Harley Davidson FXR 1987 Harley Davidson FXR 1988 Harley Davidson FXR 1989 Harley Davidson FXR 1990 Harley Davidson FXR 1991 Harley Davidson FXR 1992 Harley Davidson FXR 1993 Harley Davidson FXR 1994

FXR Fender Struts  Looking to update your shock location on your FXR or maybe even just the looks. These OEM Style fender strut covers allow for both OEM and FXRP/RT (Early Style) mounting. Features: Replica Rear to OEM Show Quality Chrome Finish Fits 1982-1994 FXR

FXR Gas Tank Sending Unit Gas tank sender unit is digitally calibrated for accuracy. Fits: FXRT 1982-1994FXRS 1982-1987FXR 1982-1994FXRD 1986-1994FXRS 1982-1984

FXR Gas Tank Sending Unit  Gas tank sender unit is digitally calibrated for accuracy.

FXR Heel/Toe Shifter Lever FXR stainless steel heel toe shifter lever is a one piece deseign for 5-speed models with mid controls. Includes 2 rubber pads. *NOTE: The distance from the center of the spline to the very end of the shorter side measures 4-1/2 inch and from the center of the spline to the longer end is 7-1/2 inch.

FXR Inspection Cover  New primary inspection covers are made from die cast aluminum.  Features: Replica to Stock Hardware Included Black or Chrome  

FXR Mid Control Kit FXR mid control kit allows the use of custom footrests. Kit includes factory style components for a mid control. Order brake line, reservoir feed line and hardware seperately. Addtional hardware is required.  Features: Chrome Peg Mounts OE Replica Pegs Shift Linakage Shifter and Peg Brake Master Cylinder

FXR Inner Primary Looking for a nice inner primary replace your stock that came with your bike? Vtwin Manufacturing offers some of the best reproduction OEM parts in the market and this is one of them! Features: Quality OE Replacement Pre Drilled for Mid Controls Quality Casted 90-93 Fitment

FXR OEM Dash Chrome-plated replacement dash with fuel gauge and gas cap holes. Features: OEM Styling Fits all Center Fill FXR Tanks

FXR Shifter Sleeve Kit FXR shifter sleeve kit includes a nylon sleeve lock tab and 2 o-rings. *NOTE: The long sleeve goes between the two outer brass bushings - one is the inspection cover and one is the inner primary cover.

FXR Swing Arm Rebuild Kit  Kit includes two bushing assemblies spacers plastic retainer rings plastic dust covers rubber isolators and one pivot shaft with locknut and sleeve. Includes all parts to mount transmission and swingarm to pivot block. Fitment Harley Davidson FXR 1982 Harley Davidson FXR 1983 Harley Davidson FXR 1984 Harley Davidson FXR 1985 Harley Davidson FXR 1986 Harley Davidson FXR 1987 Harley Davidson FXR 1988 Harley Davidson FXR 1989 Harley Davidson FXR 1990 Harley Davidson FXR 1991 Harley Davidson FXR 1992 Harley Davidson FXR 1993 Harley Davidson FXR 1994