Products

Fly Bars for 1 1/8 Risers If your going with a MX Bar and Riser combo on your bike, Forbidden Motorcycles is the originator. Paired with a set of Forbidden Risers or your favorite 1 1/8 riser, you cant beat the look and performance. Features: Quality T6 Aluminum Slotted for Internal Wirings 1 Inch Control Area Eliminates Sleeves TBW and Cable Options Available in 2.5in to 4.5in 

Forbidden Risers If you’re going with a MX Bar and Riser combo on your bike, Forbidden Motorcycles is the originator. Forbidden Risers are the original 1 1/8 riser, you cant beat the look and performance. Features: Quality T6 Aluminum T6061 Aluminum  Pre-Drilled for Internals One Piece Top Clamp 9"/11" With or Without Gauge Tabs Black or Raw

Forbidden Risers FXBB If you’re going with a MX Bar and Riser combo on your bike, Forbidden Motorcycles is the originator. Forbidden Risers are the original 1 1/8 riser, you cant beat the look and performance. Features: Quality T6 Aluminum Keep HUD Gauges T6061 Aluminum Pre-Drilled for Internals One Piece Top Clamp 9"/11" With or Without Gauge Tabs Black or Raw

Fork Extensions Looking to extend your forks without having to completely replace your tubes? These fork extensions are your answer! Features: Made from stainless steel Easy way to add some clearance to your bike Available in 39mm 41mm and 49mm

Fork Race Installer Tool This tool will easily install races. Fitment Harley Davidson FLST 2007 Harley Davidson FLST 2008 Harley Davidson FLST 2009 Harley Davidson FLST 2010 Harley Davidson FLST 2011 Harley Davidson FLST 2012 Harley Davidson FLST 2013 Harley Davidson FLST 2014 Harley Davidson FLST 2015 Harley Davidson FLST 2016 Harley Davidson FLST 2017 Harley Davidson FLT 2008 Harley Davidson FLT 2009 Harley Davidson FLT 2010 Harley Davidson FLT 2011 Harley Davidson FLT 2012 Harley Davidson FLT 2013 Harley Davidson FLT 2014 Harley Davidson FLT 2015 Harley Davidson FLT 2016 Harley Davidson FLT 2017 Harley Davidson FLT 2018 Harley Davidson FLT 2019 Harley Davidson FLT 2020 Harley Davidson FLT 2021 Harley Davidson FLT 2022 Harley Davidson FLT 2023 Harley Davidson FLT 2024 Harley Davidson FXD 2008 Harley Davidson FXD 2009 Harley Davidson FXD 2010 Harley Davidson FXD 2011 Harley Davidson FXD 2012 Harley Davidson FXD 2013 Harley Davidson FXD 2014 Harley Davidson FXD 2015 Harley Davidson FXD 2016 Harley Davidson FXD 2017 Harley Davidson FXST 2007 Harley Davidson FXST 2008 Harley Davidson FXST 2009 Harley Davidson FXST 2010 Harley Davidson FXST 2011 Harley Davidson FXST 2012 Harley Davidson FXST 2013 Harley Davidson FXST 2014 Harley Davidson FXST 2015 Harley Davidson FXST 2016 Harley Davidson FXST 2017 Harley Davidson XL 2008 Harley Davidson XL 2009 Harley Davidson XL 2010 Harley Davidson XL 2011 Harley Davidson XL 2012 Harley Davidson XL 2013 Harley Davidson XL 2014 Harley Davidson XL 2015 Harley Davidson XL 2016 Harley Davidson XL 2017 Harley Davidson XL 2018 Harley Davidson XL 2019 Harley Davidson XL 2020 Harley Davidson XL 2021 Harley Davidson XL 2022 Harley Davidson XL 2023 Harley Davidson XL 2024

Further Forward Mids Further forward mid-control kit repositions controls 2" forward of the stock location. This kit is helpful for those who feel cramped in the "knees high" riding position of standard mid-controls. It also opens up space for better maneuvering while standing or parking and offers easier access to jiffy stand. Includes left and right footrest brackets, brake and shift levers and installation hardware. Use stock footpegs, brake and shift linkage. For use with stock FXD footpegs and floorboards such as OEM #50500247 which provide extra foot room and upright seated position. Fits 2006- 2017 Dyna models with mid controls. It would be located in the same position (except further forward), as seen on the 2014-2017 FXDL and FXDLS models. Features: Fits 2006-2017 Dyna Uses Stock Linkage and Brake Rod Works With Stock Frame Mounts

Fox Fork Spring Kit The FOX Fork Spring Kit gives the proper support you need to handle the turns and keep your front end in check during hard braking. FOX’s spring kits use linear rate springs that maintain the same support throughout the fork’s travel and won’t dive when you brake or wallow when you corner. OE springs are multi-rate with a soft initial travel that ramps up dramatically through the fork’s travel. This can lead to inconsistent and unpredictable handing. FOX’s spring rate is consistent no matter where you are in the travel, eliminating the vague feeling stock springs have in bumpy corners and giving you confidence to twist the throttle and power through the turns. Features: Model-specific ride tune Works with existing forks to maintain original look Tuned for improved rider comfort and cornering control Linear spring rates support the fork with consistent force, reducing brake dive

Shox IFP-QSR Monotube Shock For Harley The IFP-R QS3 rear shock was designed to give you the comfort and control needed to keep you (and a passenger) happily eating up the miles and taming the twists and turns. With an internal floating piston to separate the nitrogen gas from the shock oil, the IFP-R shock will maintain damping control no matter how long you ride.  The IFP-R’s wide range internal rebound control also has 12 distinct clicks, allowing you to tune the exact rebound rate to balance out your spring preload and keep your rear wheel firmly planted on the road. Adjustable rebound is extremely beneficial when your ideal spring preload requires either a very soft or very firm setting or if you have large ride load changes you want to accommodate. ’s IFP-R rebound adjustable design, combined with vehicle specific damping and linear spring rates gives you a confident connection to the road while soaking up the bumps, mile after mile. Combine the IFP-R rear shock with the fork cartridge kit to get the best possible ride quality with the ultimate comfort and control. Features: Gas-charged mono-tube, with Internal Floating Piston and Rebound adjustment (IFP-R) QS3 - 3 position quick switch rebound  adjust 2" 6061-T6 aluminum type III hard anodized body Spring preload setting guide marks Spring preload set with easy to use plastic wrench (included) Fully rebuildable and revalveable Advanced high-flow, deflective disk, velocity-sensitive damping 5/8" low friction, super-finished hard chrome shaft

Fox Remote Reservoir QS3 Shocks For Harley teamed up with the industry legend, Roland Sands, to design a shock that meets the needs of a performance rider, and what they created exceeded all expectations. Features: Model-specific optimized ride tune QS3 - 3 position quick switch compression adjust QS3 - 3 position quick switch rebound adjust Aluminum remote reservoir Includes fender mounting hardware Exclusive Preload setting guide marks Includes easy to use non-marring plastic preload adjust wrench Gas-charged mono-tube with internal floating piston (IFP) 1 1/2” 6061-T6 aluminum type III hard anodized body Fully rebuildable and re-valvable Advanced high-flow, deflective speed-sensitive damping 5/8” low friction, super-finished hard chrome shaft Product may differ from Image - Fox Changes Logo Designs Frequently

Fox Shocks For Dyna Models The Fox Shocks For Dyna Models are specifically made for Harley-Davidson Dyna models and are available in gas-charged mono-tube or remote reservoir versions (RC1) both with internal floating pistons. They are fully serviceable and rebuildable, have advanced high-flow, deflective disk, velocity-sensitive damping, and are made from 1.5" 6061-T6 aluminum type III. Put these bad boys on your HD beauty to keep her bouncing right and tight! Order a pair of Fox Shocks For Dyna Models today!    Features Monotube shock available in stock 12.5" or 11.5" lowered height  Monotube shock available in 13" and 14" height RC1 available in stock 12.5" or 13.5" raised height RC1 features adjustable compression and rebound Carbon black spring 1/2" low friction, super-finished hard chrome shaft Laser-etched FOX logo Hand-adjustable spring preload Model-specific optimized ride tune

Fox Shocks For Touring Models The Fox Shocks For Touring Models are specifically made for Harley-Davidson Touring models and are gas-charged mono-tube shocks with an internal floating piston. They are fully serviceable and rebuildable, have advanced high-flow, deflective disk, velocity-sensitive damping, and are made from 1.5" 6061-T6 aluminum type III. Put these bad boys on your HD beauty to keep her bouncing right and tight! Order a pair of Fox Shocks For Touring Models today!    Features Available in stock 13" or 12" lowered height Hand-adjustable rebound damping- On Preload/Rebound Adjustable Shocks Only Hand-adjustable spring preload Carbon black spring available with standard or heavy duty spring rates 1/2" low friction, super-finished hard chrome shaft Laser-etched FOX logo Model-specific optimized ride tune  Fits 84-Current Touring Models