Ignition/Spark

Dynatek TC88 2p For anyone looking to upgrade their bikes motor, you’re going to need ignition to get the timing correct. Not only has Dynatek been in the bike game for along time, they are also the best. Features: Dynatek is the performance leader for quality electronic products in the motorcycle industry. With the help of top racers and motorcycle builders around the world, Dynatek has worked to create the electronic products necessary to support the modern motorcycle This is a single-fire, fully programmed performance ignition system Sixteen programmable advance curves fall into three groups: stock to slightly modified motors, heavily modified motors and insanely modified motors Eight rev-limiter settings in 250-rpm steps from 5750-7250 rpm Full digital accuracy in all functions Compatible with stock and performance coils -- less than 1-ohm resistance Constant monitoring of coil current to provide constant full spark energy Uses all stock sensors and connectors Built-in reverse battery and spike protection Data recording monitors 6 functions: total engine hours, time wide open throttle, longest time operating at wide open throttle, max rpm, seconds near rev limit and number of engine starts PC programmability makes possible an eight point fully definable wide open throttle curve and a fully definable part throttle curve, programmable rev limit in 50 rpm steps, 0-5 programmable dead cranking revs, total of +/- 10° rear cylinder offset, programmable rev limiter, and security lock out (pin # activated) Not for fuel-injected models

Daytona Twin Tec Ignition Kit 99-03  Daytona Twin Tec LLC has a simple philosophy - do one thing and do it well Kit for Twin Cam 88 99-03 carb models features an ignition module, spark plug wires and single-fire coil Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors Five rotary switches for timing adjustments, advanced slope and rpm limits Digital rpm limiter (set in 100-rpm steps) Selectable multi-spark mode for quick starts and smooth running Coil outputs are protected against short circuits Optional PC link cable and software available for programming custom curves, programs available at (www.daytona-twintec.com) Instructions included Made in the U.S.A. For models listed with two 12-pin ignition module connectors 04-05 Includes new 12-pin TC88A ignition module, PC link cable, single-fire coil, and spark plug wires Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors Five rotary switches for timing adjustments, advanced slope and rpm limits Digital rpm limiter (set in 100-rpm steps) Selectable multi-spark mode for quick starts and smooth running Coil outputs are protected against short circuits Instructions included Made in the U.S.A.

Dyna 2000 Ignition Module The dyna 2000 digital ignition system for harley-davidson motorcycles, which has become the standard for performance and versatility in the harley aftermarket, has been enhanced to include even more features.Including expanded advance curve functionality, vacuum advance compensation, and a special retard mode for use with turbocharged and nitrous bikes.The dyna 2000 allows selection between four different advance curves and four independent rev limiter settings from 6000 to 7500 rpm.Dyna 2000 ignition modules use the stock factory pick-up and simply plug into the existing factory wiring harness on 1991-1998 model bikes.

Dynatek TC88-3 For anyone looking to upgrade their bikes motor, you’re going to need ignition to get the timing correct. Not only has Dynatek been in the bike game for along time, they are also the best. Features: Module has a single connector Loaded with 16 different advance curves, giving engine builder a wide range of curves to work with Adjustable rev limiter allows the user to select a rev limit ranging from 5,750 to 7,500 rpm in 250 rpm steps

Daytona TwinTec TC 88 Daytona TwinTec TC88 digital performance ignition signals a new era in twin cam ignition power and capability.The tc88 enhances the power of the single fire ignition by allowing selection between 16 programmable advance curves, covering the entire range of engine modifications.From stock to insanely modified engines, the tc88 provides the widest range and highest level of advance curve functionality for twin cam available in today's market.There are also eight different rev limiter settings from 5750-7250 rpm.All tc88 functions have full digital accuracy to insure maximum performance with unparalleled quality.Not legal for use in california on pollution controlled vehicles - check local laws before installing.

Dyna 2000i In Cone Ignition The dyna 2ki programmable ignition is the newest addition to the successful line of dyna 2000 ignition systems.The 2ki not only adds to, but extends many features of the best selling dyna 2000 module out of sight in a completely new design that fits in the cone of shovelhead and evolution engines.

ACCEL Twin Cam Super Coil ACCEL®'s famous Super Coil is now available for fuel injected Twin Cam applications• Allows faster rise time, higher voltage and maximum spark energy to the plugs• Quicker starting and improved idle• Crisper throttle response• Fits in the stock location• Replaces OEM 31696-07A• Measures 2-1/2″ W x 4-3/4″ H x 3″ D Features: Faster rise times, higher voltage, and maximum spark energy to the plug Delivers up to 20% more voltage than OEM coils Designed to fit in stock location and under most coil covers Available in black

Dynatek Ignition Coils Dyna performance replacement coils are high tech, top quality coils, designed for maximum performance.They produce spark voltages in excess of 30,000 volts and spark energies second to none.Dynatek coils are available in a wide variety of resistances and output configurations to allow easy replacement of stock coils.Dynatek coils work with factory electronic ignitions, points, and aftermarket ignitions.Choose from four body styles and five different primary resistance ranges to match your ignition needs.Advanced magnetic core technology of the dynatek mini series coils delivers high output in one of the smallest packages available.Great for customs where coils need to be hidden.Before selecting a coil, check the coil primary resistance requirements as specified by the manufacturer of the ignition being used.Not legal for use in california on pollution controlled vehicles - check local laws before installing.

Features: Want to run a Twin Cam motor in your custom bike With Thunder Heart Performance's new Twin Cam Stand-Alone Ignition, you can...easily This ignition is designed for use in custom bike applications where a Twin Cam motor and crank position sensor are going to be used It consolidates all ignition components into a small, easy-to-mount package Wiring the ignition system is a snap, because the builder doesn't need a factory Harley wiring harness The included Smart Link software allows the user to fully program the front and rear spark timing and rev limit with a laptop computer  

NGK Special Spark Plugs The name NGK is nothing new to engines. These premium OEM and Hi Performance spark plugs are exact what you need for your new engine build or annual tune up. Features: Trivalent metal plating provides superior anti-corrosion and anti-seizing properties Corrugated ribs prevent flashover Pure alumina silicate ceramic insulator provides superior strength and better heat transfer Copper core aids in heat removal Triple seals prevent leakage Sold individually

Champion Spark Plugs Twin Cam - RA8HC - 24 Pack  Copper Plus spark plug has a copper core center electrode that allows for accurate control of heat range, optimizing performance and longevity of the spark plug, Patented SAC-9 semi-conductor resistor for maximum EMI and RFI suppression, Patented Ultraseal* coated shell for rust prevention, Made in the USA

Replacement Ignition Switches Features: Switches are available with or without fork lock; switches and fork locks use same key Include two keys Ignitions switches are available with a chrome or gloss black finish Fork lock available separately; see FRAMES & SUSPENSION

Replacement Crank Sensor Features: Direct replacement for OEM sensors  100% tested for functionality 

Drag Specialties Spark Plug Wires 8.8mm Constructed with silicone throughout the jacket, insulation and core to deliver high-temperature resistance, Rated at SAE Class E J2031 with a continuous operating temperature of 450?F