Products

Kibblewhite Compression Release Building a big compression motor that needs a little relief to get fired up? Kibblewhite's got you covered with these state of the art compression releases. Features: Help reduce hot start issues and starter/battery loads Have 5-7 Newtons of closing force resistance Custom molded knobs ensure they stay cool to the touch and are easy to operate Require an M10 x 1.00 threaded hole for installation

Kibblewhite Cylinder Studs Features: These high performance cylinder studs are made from 180,000 psi yield strength, fine grain, heat treated, premium grade 8740 material Threads are rolled after heat treating to insure maximum compressive stresses are retained, insuring maximum strength, and longest fatigue life possible The case end threads are designed to have slight interference fit to maintain good thread contact at hight temps Studs are center less ground to ensure concentricity, and finished with a premium black oxide treatment

Progressively wound springs using Kobe super-clean, chrome silicon-based wire that is heat treated and shot peened Tight-tolerance, FEA-designed hardened steel Posi-Loc™ style upper retainers to ensure correct assembly height and resist keeper "pull through" Hardened steel basewashers control lateral movement Kits use OEM-style valve keys (sold separately) Made in the U.S.A.

Kibblewhite Racing Valve Spring Kits 600" max lift kits are designed for maximum performance Feature interference-wound, double-chrome silicone springs; heat-treated steel base washers Include steel retainers Made in the U.S.A.

Valve Spring Kit Kibblewhite Hd .600 Lift Twin Cam 88" Wound from premium kobe super-clean chrome silicon wire.Kpmi valve springs are heat-treated, stress relieved and shot peened to insure maximum performance and life.Springs are engineered for each specific application using proprietary advanced spring design simulation, and analysis software.Engineers pay special attention to cam and spring harmonics, stress, mass and operating rpm.

Valve Spring Kit Kibblewhite Hd .600 Lift Twin Cam 88-103" Wound from premium kobe super-clean chrome silicon wire.Kpmi valve springs are heat-treated, stress relieved and shot peened to insure maximum performance and life.Springs are engineered for each specific application using proprietary advanced spring design simulation, and analysis software.Engineers pay special attention to cam and spring harmonics, stress, mass and operating rpm.

Kibblewhite Wrist Pin Bushing - Twin Cam Constructed of SAE660 bearing bronze, Made in the U.S.A., Does not include oil holes. These must be drilled after installation.

Kieth Black Hypereutectic Piston Kit for TC88 motors. Comes with paired cylinders bored and honed with rings gapped. Was installed to check deck height, never ran. 10.5:1 Compression, comes with head gaskets. *** ALL SALES FINAL ***   

Nuts - Well - 10-32 - 5-Pack Built-in washer, won't push through the mounting hole, Made in the U.S.A.

Klockwerks Colored Sport Flare Road Glide Shields Wind tunnel designed and tested, the "hips" provide added downforce while the flip at the tip directs air over the rider to help eliminate swirling and buffeting Made from acrylic and has a vibrant fluorescent edge to give your motorcycle a little extra pop! All are predrilled for easy mounting using stock windshield hardware Made in the U.S.A.

Kodlin Motorcycles Eylpse 2-1 LED Signals Features: White run light and full super small, amazingly bright contrast amber turn signal with smoked lenses Engineered in Germany with SMD-LED technology The housing is CNC machined from billet aluminum Some applications may require the use of a load equalizer. May fit other cable operated clutch models by adding spacer.

Product Description Designed for Aggressive Comfort, the APEX Edge Foot Pegs will plant your feet on a solid platform for increased stability and control. The serrated finish increases traction that offers confidence deep in the corners. The light weight aggressive looking Aluminum Foot Pegs offer increased performance and styling. Sold in sets of 2. Add the Pro-Line Peg Adjuster for maximum adjustability. See below for mounting location compatibility Fitment Universal HD - UN-FC-01 Dyna 1991-2017 Dyna Wide Glide, Dyna Street Bob, Dyna Fat Bob, Dyna Low Rider, Super Glide, Dyna FXD Passenger Location ONLY models (No Fitment for Pilot Position): Switchback Sportsters 1984-2022 Iron 883, Iron 1200 FXR 1984-1999 Early Softail 1984-2016 Softail Standard FXST, Softail Deuce FXSTD, Softail Night Train FXSTB Touring - Passenger Location ONLY models (No Fitment for Pilot Position): 1984-2022 Road King, Road Glide, Electra Glide, Street Glide, Limited, Ultra NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description The Digital Gauge Bezel is a light weight billet aluminum housing for the M8 Softail Digital Gauge and other H-D model from support of KOSO D2.  The light weight Aluminum housing completely encloses your digital gauge and creates a clean finished look. Whether you use our Universal T-Bar Clamp Mount or Isolated Riser Top Mount, you can put your gauges exactly where you want them. Be sure to add a mount (Universal T-Bar clamp or Isolated Riser Top Mount), providing you even more flexibility with how you want your setup. Light Weight Aluminum construction Adjustable pitch Multiple mounting options to choose from. Offered in Black Anodized or Machine finishes All Billet Design. Light and compact. Fitment: OEM Harley Gauge All Harley Softail Models 2018 and up with the HD digital gauge. (Standard, Street Bob, Sport Glide, Lowrider ST) Most Softail applications will require an extension harness. KR-NSXH-3201 or 20-A91803A are available. KOSO Gauge For Baggers, Dynas, Sportsters, and Softail models we offer a gauge conversion with the Koso D2 meter. (Sold Separately) For Dyna's Sportsters and Pre-18 model Softails: See the model-specific product page. Most Softail applications will require an extension harness. KR-NSXH-3201 or 20-A91803A are available. 8"+ Risers for Bagger may require an additional extension harness (20-A91803A) IMPORTANT: the 5" version for the Kickback option is NOT COMPATIBLE with our Raptor or T-Rex Pullback Plates on bagger applications. NOTE: Koso D2 gauge and rubber gasket must be purchased unless bike is already configured with Harley Digital Style Gauge. If bike currently has OEM digital style gauge, Rubber gasket, hardware and gauge will be reused and installed in Kraus Digital Gauge Bezel. Mounting Options: T-Bar Clamps Use the Universal T-bar Riser Clamp option for the most adjustability. (1.25" clamps for Kraus Isolated Risers. 1.5" Clamps for Non-Kraus Brand aftermarket 1.5" risers/t-bars.) (T-bar Clamps are 3.5" on center and can be mounted in front or behind the risers/bars). For maximum adjustability add a 3" extension. Isolated Risers Top Mount Use this option for greatest visibility of gauge bezel. For maximum adjustability add a 3" extension. NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.