Products

Product Description Small improvements can make a big difference.  The Kraus EZ-Shift changes your shifter’s leverage ratio so you can easily find Neutral, even at a dead stop.  Find neutral on M8 transmissions, at slow speeds Greater leverage makes smooth shifts across all gears Makes shifting 20% easier Enhances your riding experience Made in the USA of American billet aluminum EZ-Shift finds the right gear every time.  Use with stock shift or aftermarket levers, works great for short levers. Easily bolt it on in 5 min. Fits all M8 Baggers and Softails. Billet Machined from high grade material.  This small but effective component makes a big difference in your riding experience. Offsetting the shift location changes the ratio to create just a little longer throw on your toe lever. This smooths out the gear change, resulting in an EZ shift.  It’s a must have if you ride in cities or traffic, your left hand and clutch will thank you. Holding that clutch lever in continues to drag the clutch creating heat in the primary and motor. Your bike will run cooler and your clutch and fluid will last longer if you pop it into neutral at the light and release the clutch.  Not to mention trying to back the bike up in gear, having to kill the motor to get neutral… Don’t worry your buddies will wait for you. All necessary hardware for installation is included. For Twin Cams, see the fitment specific product page.  Must have OEM transmission arm PN: 33900175. Non OEM, straight style shift arms will not work NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments. Downloads Install Guide

Product Description Small improvements can make a big difference.  The Kraus EZ-Shift for H-D Twin Cams changes your shifter’s leverage ratio, so you can easily find Neutral—even at a dead stop.  Find neutral on Twin Cam transmissions, especially at slow speeds Greater leverage makes smooth shifts across all gears Makes shifting 20% easier Enhances your riding experience Easily bolts on in 5 min Made in the USA of high grade American billet aluminum EZ-Shift finds the right gear every time.  This small but effective component makes a big difference in your riding experience. Offsetting the shift location changes the ratio to create just a little longer throw on your toe lever. This smooths out the gear change, resulting in an EZ shift.  It’s a must have if you ride in cities or traffic, your left hand and clutch will thank you. Holding that clutch lever in continues to drag the clutch creating heat in the primary and motor. Your bike will run cooler and your clutch and fluid will last longer if you pop it into neutral at the light and release the clutch.  Not to mention trying to back the bike up in gear, having to kill the motor to get neutral… Don’t worry your buddies will wait for you. All necessary hardware for installation is included.FITMENT: Fits all H-D Twin Cam models.  For M8 Baggers and 18+ Softails, see the fitment specific product page.  Designed to fit OEM transmission arms only. Aftermarket will likely not work. (OEM PN's: 33849-97 or 33715-85A) NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments. Downloads Install Guide

Kraus Front Radial Caliper Adapters Upgrade to Radial brake calipers with these easy-to-install mounts. Compatible with aftermarket 108mm radial brake calipers on 2000 and up stock Harley forks.  The increased fluid capacity of aftermarket radial brake calipers improved lever feel and overall braking performance.   This product is ambidextrous. Run them on the left or right side. If you have dual disks, order a set of two. For use on stock 2000 and up Harley forks. Use with aftermarket 108mm Radial Calipers.  Use with 11.5", 11.8" or oversize rotors by adding spacers between mount and radial caliper.  

Kraus Isolated RisersKRAUS has developed the solution for bad handling, sloppy bars.The Isolated Riser Bar Clamp is designed to offer a solid secure mount, and vibration damping, solving the problem of unwanted handlebar movement.The Isolated Risers house vibration dampening rubber bushings in the clamp body, directly below your handlebars. The proprietary use of these rubber isolators take the vibration out of the bars but do not allow excessive movement caused by leverage like traditional OEM rubber mounted bar setups. Isolated Risers are mounted to your top triple tree using the provided solid bushings. With a stronger, solid connection to your front suspension, you have more control. Running Isolated Risers allows precise input into steering, enhances control and dissipates vibration in your bars and hands.

Kraus Kickback Isolated Riser Increase comfort and control with Kickback Isolated Risers. The Kickback moves the bars 1.5" towards the rider. Kickback risers utilize our Isolated Riser technology while increasing overall structural solidity with a one-piece Kickback center section. The entire riser unit is designed to offer the most solid secure mount, while still retaining vibration damping, solving the problem of unwanted handlebar movement. The Isolated Risers incorporates vibration dampening rubber bushings in the clamp body, directly below your handlebars. The proprietary use of these rubber isolators take the vibration out of the bars but do not allow excessive movement caused by leverage, like traditional OEM rubber mounted bar setups. With a stronger connection to your front suspension, you have more control. Running Isolated Riser Clamps allows precise input into steering, enhancing control. Handlebar clamping area is 1⅛" for MX style bars or 1" for traditional OEM Harley and aftermarket bars. Features: The secure feeling of a rigidly mounted handlebar but without the vibration. Bar Clamp has an opening to accommodate hidden wiring. Choose bar clamp for 1⅛ Moto bars or traditional 1" bars. Bushing life is increased for less maintenance. 3.5” on center for standard OEM Harley fitment. Ships with 1 solid riser bushing set. measured from the bottom of the riser to the middle of the bar clamp

Product Description The LUX Gauge Bezel has an aggressively styled and beautifully machined front face. Ditch your stock plastic gauge housing and clean up your Road Glide dash. This machined piece encases your stock Harley gauges and mounts in a variety of different ways. Whether you use our Universal T-Bar Clamp Mount or Isolated Riser Top Mount, you can put your gauges exactly where you want them. The rear mounting point allows you to adjust the position in an almost infinite range for optimum positioning and the perfect cockpit setup. Be sure to add a mount (Universal T-Bar clamp or Isolated Riser Top Mount) in the Build Your Kit section, providing you even more flexibility with how you want your setup. Redesigned front bezel improves the look and readability of your gauges Engineered with a rear mount to maximize placement options Made in the USA of American billet aluminum  Fitment Fits 2015-2023 Road Glide Stock Gauges The Kraus RG Billet Gauge Bezel can be paired with any of the following mounting styles T-Bar Clamps Use the Universal T-bar Riser Clamp option for the most adjustability. (1.25" clamps for Kraus Isolated Risers. 1.5" Clamps for Non-Kraus Brand aftermarket 1.5" risers/t-bars.) (T-bar Clamps are 3.5" on center and can be mounted in front or behind the risers/bars). All Billet Design. Light and compact. For maximum adjustability add a 3" extension. Isolated Risers Top Gauge Mount Use this option for greatest visibility of gauge mount. For maximum adjustability add a 3" extension. NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments. Downloads Install Guide

Product Description Ambitious riders need comfortable Harley floorboards that inspire confidence. And confidence is control. The Kraus Max Lean Floorboards are engineered to sit closer to the rider’s center of gravity than stock floorboards. Their aggressive design leaves the rider feeling completely planted at pace, while the kickback heel and tapered edge allow huge lean angles. Because no two riders are identical, width and pitch are fully adjustable, creating the best Harley custom floorboards available. Features 100% made in the USA 1" higher and 2” back from stock position for a mid-control feel Adjustable mounting for pitch angle and stance width Kicked back heel for a more aggressive stance Tapered edge for greater lean angle Aggressive grip to keep your foot planted Lightweight, high strength billet aluminum Offered in black anodized or machine finish Add the Max Lean Foot Control Kit - the ultimate cockpit setup for your feet. Fitment: 2006 and Up Harley-Davidson Touring models. Replaces OEM assemblies 50683-04, 50688-04 2023+ CVO models will require Harley PN: 50674-05 (x4) Screws 2024+ CVO Road Glide ST models require additional Harley PN: 47200302A (x2) Front Floorboard Mounts NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description Complete the look and feel of your foot controls by combining the Max Lean Floorboards with the Max Lean Mini Floorboards to get the most style and comfort out of your Harley. The Max Lean Mini floorboards are designed and engineered to be used with a variety of different Harley-Davidson models. Additional applications include highway pegs, passenger pegs, or as your main foot pegs. Get the most adjustability by adding the Pro-Line Peg Adjuster. Sold in pairs Fitment Universal HD Fits models with H-D male mount footpeg supports. Passenger location on 14 and Up Touring Models Softail up to 2017 Dyna FXR Sportster NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Kraus MHP Billet Gauge Bezel MHP Billet Gauge Bezel All Billet Design Light and compact Fitment Fits 2015-and up Road Glide Stock Gauges NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description This extension gives 1" of extra ground clearance on aftermarket Ohlins rear shocks. Made from 7075 billet aluminum Stackable to give up to 2" of extra clearance (Bagger will require modification to swingarm in order to stack two extensions) Sold in pairs Fitment Compatible with the following Ohlins Shocks: HD 044 HD 357 HD 762 HD 764 HD 764LE HD 765 HD 772 HD 776 HD 777 HD 779 HD 816 HD 817 54000193 (Screamin' Eagle/Ohlins Remote Reservoir Shocks) Call to confirm any additional fitments. NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Kraus Motor Co. KR8 Inverted Front End Kit Upgrade your Harley Davidson Bagger with the KR8 Inverted Front End Kit, designed specifically for performance upgrades. This kit includes Ohlins inverted front forks, known for their superior handling and ride quality, as well as new KR8 triple trees, Kraus radial brake mounts, and KR8 fork guards to protect the fork seals. The kit is also compatible with the Kraus Isolated Riser system, allowing for a customizable riding position. This kit is the result of a partnership between Kraus Moto and Ohlins racing technology, ensuring top-of-the-line quality and performance. Choose between performance valving for a refined ride or touring valving for a plusher feel. BENEFITS Improved handling and ride quality for a better overall riding experience Customizable look and riding position Increased braking power for added safety High-quality components for long-lasting durability Choose between +1" (standard) and (+2") fork length options FEATURES Ohlins inverted front forks for superior handling and ride quality KR8 triple trees for a custom look and improved stability Kraus 108mm radial brake mounts for increased braking power KR8 fork guards to protect the fork seals Compatible with the Kraus Isolated Riser system for customizable riding position TOURING VALVING:  Engineered to perform on the open road, the upper part of the stroke provides a comfortable, plush ride. As the stroke deepens, the valving manages the forces, allowing the fork to adapt to the road surface for optimal traction and road-holding capability, even with a fully loaded bike. This fork is specifically designed and recommended for long-distance riders seeking the ultimate touring experience. PERFORMANCE VALVING:  Designed specifically for performance riding, built to keep up with other riders in fast-paced environments, with developed tuning used by track riders and those who ride hard. Elevate your riding experience with a complete front end overhaul that transforms performance, instills confidence, and keeps you connected and in control on any road. +2" LENGTH:  Specially suited for aggressive riders looking to maximize their lean angle, this option raises your ride by 2 inches, boosting ground clearance. Perfect for high-speed twisties and track use. FITMENT 2008-2013 Harley Touring Models (1" Stem) 2014-Up Harley Touring Models (30mm Stem) Will Not Fit 21" Front Wheel  NOTE: 108mm Radial Brake Fitment Only 2024 Models will require purchase of KR8 Fender Adapter Brackets or 23' and below year model fender; CB-FFN-19MD-210 & CB-FFN-19SH-205 are compatible. 2024 Street Glide fitment coming soon NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description The Pro-Line Peg Adjuster is a must-have addition for any rider with Kraus Moto Pegs. With modern spline fitment, it is compatible with our Max Lean Mini Boards, Apex Edge Foot Pegs, and other Kraus Pegs. The adjuster allows for 360 degrees of adjustability, making it easier to find the perfect riding position by moving the peg position up, down, forwards or backwards to improve your overall riding experience. NOTE: Sold as adjuster ONLY as a pair (2). Must purchase pegs or mini boards separately. Comes in a set of two. Benefits Improve your riding experience with a customized position Easy to use and adjust Compatible with a variety of Kraus Pegs for versatility Features Modern spline fitment for compatibility with Kraus Pegs 360 degrees of adjustability for a customized riding experience Durable and long-lasting construction Fitment Compatible with Kraus Moto pegs. Must have modern spline fitment. Max Lean Mini Boards Apex Edge Foot Pegs ERG One Mini Boards NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description These perch half clamps are the newest addition to the Kraus Pro-line product line. These Pro-Line Half Clamps are designed and machined to the Kraus high standards and offer a replacement to the Harley stock half clamps when running aftermarket bars. Keep a clean and precise look while securing the handlebar master cylinder and clutch control. CNC Billet Aluminum construction Fitment Not Compatible with 2023 CVO Models - Please call to confirm fitment Works with the FM Fly Moto Handlebar and the ODI Podium V-Twin/Moto Handlebar and early OEM HD bars. This is a universal fit part; it may or may not fit without modification. NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description The Kraus Pro-Line Slider Derby Cover is a direct replacement for your stock derby cover. This isn't your normal dress up cover. It has a Delrin Slider so when you're deep in that left hand corner you're not going to lay pavement scratches across your primary. Comes with a replaceable Delrin slider to protect your primary. Fitment Fits ’16-later Touring and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438. All required Hardware included NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Product Description The Kraus Pro-Line Slider Derby Cover is a direct replacement for your stock derby cover. This isn't your normal dress up cover. It has a Delrin Slider so when you're deep in that left hand corner you're not going to lay pavement scratches across your primary. Comes with a replaceable Delrin slider to protect your primary. Fitment Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna, ’99-'18 Softail (except FLSB) and ’99-’15 Touring models (except FLHTCUL, FLHTKL or ’07-’15 Touring with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438). All required Hardware included NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.