Products

Product Description The Kraus Pro-Line Slider Derby Cover is a direct replacement for your stock derby cover. This isn't your normal dress up cover. It has a Delrin Slider so when you're deep in that left hand corner you're not going to lay pavement scratches across your primary. Comes with a replaceable Delrin slider to protect your primary. Fitment Fits '18-later FLSB and '19-later Softail models. Also fits '18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043. All required Hardware included NOTE: Kraus Motor Co. products are designed and engineered to be compatible with OEM fitments.

Kraus Radial Caliper Bolt Kit Use these kits to mount radial brake calipers to Kraus Front or Rear Radial Brake Caliper Mounts.  2.5mm Spacers stack to form all commonly needed spacing. For use with aftermarket radial calipers If using OEM calipers we recommend setting the caliper in place and measuring for proper spacing. Each kit will mount one caliper 60mm kit  Two stainless 12 pt. ARP bolts (M10 x 1.25 x 60mm) 8 Stackable 2.5mm Spacers. Allows for a total caliper spacing of 0mm to 10mm. Use with Kraus front radial  caliper mounts for 11.5" (292mm) Rotors Use with Kraus Dynamoto inverted front end for 11.8" (300mm) & 310mm rotors. 70mm kit . Two stainless 12 pt. ARP bolts (M10 x 1.25 x 70mm) 14 Stackable 2.5mm Spacers. Allows for a total caliper spacing of 10mm to 18mm. Use with Kraus front radial caliper mounts for 11.8" (300mm) brake rotors. Use with any Kraus Rear Radial Caliper Mounts for 11.5 or 11.8" rotors. Use with Dynamoto inverted front end for 12.6" (320mm)  or 330mm brake rotors. 80mm kit  Two stainless 12 pt. ARP bolts (M10 x 1.25 x 80mm) 22 Stackable 2.5mm Spacers. Allows for a total caliper spacing of 20mm to 28mm Use with Kraus front radial caliper mounts for 310mm, 12.6" (320mm) or 330mm brake rotors. Use with any Kraus rear radial caliper mount for 310mm rotors or 12.6" (320mm) brake rotos. Use with KRT inverted front end for 12.6" (320mm) or 330mm brake rotors.

Kraus Raptor Plate The Raptor Pull Back Plate is for Road Glides.  Bolt it to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5" so that you can mount any standard risers and they will clear the Gauges on 2014 up Road Glides. The Raptor Plate adds 2" of total height to the bar/riser on 2014 to present bagger. The Raptor Plate improves bar position when using Motocross style bars. We recommend running Kraus Isolated Risers with this setup for Vibration Damping. Holes will need to be cut in the bagger Nacelle for the risers to protrude or use our Billet Gauge Mount and get rid of that stock plastic Nacelle altogether.Please be aware that you will lose the Accessory and Fork Lock positions of the stock Key Switch. On CVO models the stock Steering Lock will interfere and cannot be used. Check with your local shop or dealership for options. Some bikes can be reprogrammed to not need the key switch at all with the Harley CVO Flash.The risers solid mount to the stock or aftermarket triple trees and the risers solid mount to the Raptor Plate.

Kraus Rear Radial Mount The KRAUS Rear Radial Caliper Mount is machined out of billet aluminum and allows you to run a single 108mm radial caliper on the rear of your FXD/Dyna/FXR Features: Offered in 1'', 3/4'' and 25mm diameters This mount will allow fitment of commonly found 108mm style calipers and will allow up to a 300mm Rotor Size. NOTE: Please make sure you get an accurate measurement of your stock axle diameter to confirm proper fitment before ordering. If you have any challenges doing this, call us, we know the specs and can help.Caliper spacers may be needed to space off your caliper to the appropriate hight depending on your rotor size.

Kraus Remote Reservoir Mounts  Kraus Resi Mounts for HD 357 and HD 044 Ohlins Shocks. Show off those top-of-the-line shocks! Resi Mounts allow you to mount your Ohlins Remote Reservoirs on the rear fender strut cover for easy access to the compression damping knob and aggressive looks. Use the supplied clamp and mount the reservoirs on the bag front rails when running Docking Hardware for a tour pack or backrest. NOTE: The HD 357 has a short hose and CANNOT be mounted on the front bag rail using Kraus Reservoir Mounts. Works with 2007 and up baggers/touring. When mounting to the bag front rails we recommend using the HD 044 shocks which have a longer reservoir hose.

Kraus T-Rex Pull Back Plate The T-Rex Pull Back Plate mounts to the top of the triple tree and moves your bar mounts towards the rider 2.5". The T-Rex plate adds 1" of height. Fitment: Street Glides and bikes with Batwing Fairings.  The T-Rex Plate moves the bars back towards the rider to clear the Navigation screen and stereo so you can run straight risers or T-Bars. When running the T-Rex pullback plate you can not use your stock Key Switch/Steering Lock so you will need to relocate the switch or "CVO flash" your bike for keyless ignition. We can help you with that! Suggested for use on Street Glides and Electra Glides but can also be used on other Harley's including Road Glides, Softails, Dynas and FXR. If you are running Kraus Isolated Risers then this kit has everything you need to have the most solid and best-performing setup. If you are not running Kraus Isolated Risers you will need a set of replacement Bagger Polyurethane Bushings to install under your risers in the T-rex Plate.

KRAUS RG Billet Gauge Mount The Kraus RG Billet Gauge Mount allows you to get rid of your stock plastic gauge housing and clean up your dash. This beautifully machined piece encases your stock harley gauge and mounts them securely with several options. Features: Kraus Isolated Risers Top Clamp Universal T-bar & Riser Clamp (1.25" diameter clamps are 3.5" on center and can be mounted in front or behind the risers/bars) Forward/Reverse tilt is adjustable All Billet Design Light and compact Made in the USA

Kraus Vector Axle Adjuster Keep your belt or chain tensioned and your wheel aligned with our Vector One Billet Bagger Axle Adjuster. The functional problem with the Stock Bagger Swingarm is the axle adjusters and axle. The stock setup is engineered for motors with limited torque. The stock axle adjusters have a tendency to slip under load; when you give it the pepper your stock axle can slip resulting in a loose belt and a misaligned rear wheel. Wheel alignment is a major geometry concern, we have seen just a small amount of wheel misalignment create speed wobbles and ill-handling effects. The Kraus Vector One Adjuster uses a threaded locking mechanism that is easy to adjust and secures perfect wheel alignment no matter how much torque you throw at it. A must have upgrade for all baggers, especially high horse power machines. Quality: The high grade nickel plated 1144 Stress proof alloy steel axle is nearly 2 times stronger than a stainless axle. The adjuster housings and slides are billet aluminum. The axle nuts are Stainless and are secured by a c-clip. Ease of alignment: You don't need coat hangers or zip-ties to align your wheel. Using clocking tick marks and a locking screw mechanism makes it easy and secure. Fits 2009-2020 Touring/Bagger Models

Ktech Razor Lites Dyna The K-Tech Razor ‘Lite’ shocks offer refined handling and enhanced looks over the standard equipment. The Razor ‘Lite’ features rebound damping, spring preload and length adjustment to allow owners of classic style motorcycles to customise their ride with understated looks and improved performance. Features: Increased comfort and control Rebound damping adjustment Spring preload adjustment Length adjustment Nitrogen filled N2 Anodised black finish Simply bolts on to replace original equipment Spring rate options available Notices: 15in length may require customization for fitment  15in length are custom order and non refundable

Ktech Tracker Cartridge The K-Tech Tracker front fork cartridges are a complete replacement damping system designed to fit into original equipment front forks that do not have external adjustment as standard. The Tracker cartridges are designed and manufactured in house to the same standard as all our performance products using the highest grade materials and processes. Refinement, control, stability and style comes as standard with the K-Tech Tracker front fork cartridges that are aimed at the custom/classic motorcycle owner. The Tracker cartridges come with external adjustment for spring preload, compression and rebound damping allowing the rider to adjust the forks for all types of riding styles and conditions. Features: External independent adjustment for compression and rebound damping External spring preload adjustment Increased comfort and control Refined looks Optional spring rates. The Tracker cartridges are only available through K-Tech authorised dealers who have been trained to install these products, there are specialist tools and techniques required to guarantee performance and safety of this product. Standard Springs Included. ****Please Email After Purchase to Ensure Correct Fork Length****

Le Pera Kickflip Seats The seat that every freestyler would be stoked to own Top-grade black vinyl cover Base plate is powder-coated steel and carpeted to protect painted surfaces Featuring LePera's Marathon Foam for maximum stability and comfort Handcrafted with LePera's iconic attention to detail Made in the U.S.A.

Le Pera Tail Whip Seats Taking the Kickflip one step further If its more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for! Molded marathon Foam BikerTec custom cover Highly detailed powder-coated steel carpeted base Family owned and operated Made in the U.S.A.

Leather Pros V3 bags The hands down best replica T-Sport bags on the market. With years of experience in the Harley bag game, Leather Pros took the demand drummed up from the Dyna culture and reproduced the best bags Harley ever designed. With durable canvas (or leather option) this bags not only look great but they are perfect for that quick rip around town, with enough room for those long trips as well. Available for Dyna, FXR and Sportster models.