Products

Feuling Parts Camshafts for Twin Cams Experience vicious power gains, wide streetable power band from Feuling Parts Camshafts for your twin cam.  525 CAMS - A real workhorse, designed to increase torque band width and increase fuel economy. Great bolt in camshaft upgrade for stock 88 & 96 engines also performs very well in 103 strokers. Produces strong low and mid range power with a linear horsepower and torque curve. Can be used with factory valve springs, pushrods and lifters. Increases throttle response and eases starting. Will also respond well to increased compression and cylinder head work. RPM 1,750 - 5,500 543 CAMS - The Freeway Flyer, a great camshaft for those who want more top end power than our 525 cam without sacrificing low end torque. Extremely smooth cam lobe layout maintains quiet valvetrain and produces the smoothest cruise power band available. Excellent bolt in camshaft for stock to mild 96 and 103 engines and works well in 88 & 95 engines. This cam is easy starting, increases throttle response and fuel mileage. Responds well to increased compression ratio, performance exhaust and a high flow air cleaner. Performance valve springs are required on 99-04 engines and performance pushrods, lifters and clutch are recommended but not required. RPM 1,900 - 6,000 574 CAMS - Wicked power band for modified engines and an excellent bolt in for stock 96, 103 & 110 engines. This is a great all around camshaft with solid low end performance and mind blowing mid and top end power. Extremely smooth cam lobe design creates a very smooth valve-train motion. Responds very well to modified cylinder heads, increased compression ratio, performance exhaust and intake systems. Performance valve springs are required on 99-04 engines and performance pushrods, lifters and clutch are recommended. RPM 2,100 - 6,500 594 CAMS - Fierce performing camshaft for an array of engines sizes, large displacement 103, 110 & 124 engines looking for a superior torque band with excellent horsepower gains in heavy bikes (RPM 2,200 - 6,250.) Smaller high revving displacement 95 style engines in lighter bikes looking to twist the throttle and tap into some horsepower (RPM 2,500 - 6,800). Large displacements respond well to increased compression ratio and smaller displacements will require it. 594 cams require high performance valve springs, pushrods, lifters, carburetor and or throttle body work, performance exhaust, intake and clutch. 630 CAMS - Vicious power gains, wide streetable power band from a high lift profile camshaft for high performance engines with highly modified cylinder heads and compression ratio. Carburetor and or throttle body work required along with a performance exhaust and intake system. Maintains low end performance with eye blurring mid and top end power. High performance valve springs, pushrods, lifters and clutch required. RPM 2,500 - 6,900+  

Fueling Crank Run Out Tool Simplifies and speeds the process of checking crankshaft run out on both Twin Cam® and EVO® model engines with the crankshaft installed. Mounts to the cam chest side of the engine case using the designated mounting holes of the tool combined with the handled thumb screws and the case cam cover bolt holes. Gives quick and accurate readings of the engine’s crank pinion shaft run out and makes for a great display to show and explain to customers the condition of their crankshaft. Quickly and accurately measures gear drive back lash on Twin Cam engines, using the supplied spacer to bolt indicator to top right cam cover bolt hole. Features: High Grade Billet Plate Top Quality Dial Indicator Works for TC and Evo Models Made in the USA

Feuling Cylinder Stud and Head Kit Kit includes eight cylinder studs, eight head bolts, moly assembly lubricant and thread sealant Stock replacement; reusable studs and head bolts recommended for all V-Twin engines Precision J-formed threads prevent galling and promote more consistent torque loading Designed to exceed the needs of high-performance engines Manufactured by ARP® to Feuling's exact specifications Stop head and base gasket failure Made in the U.S.A.

Feuling Cylinder Stud Kit Precision J-form threads for optimum engagement, to prevent galling and promote more consistent torque loading Superior in strength and performance; designed to exceed needs of high-performance engines Kit includes eight cylinder studs, moly assembly lubricant and thread sealant Stock replacement; reusable studs recommended for all V-Twin engines Manufactured by ARP® to Feuling's exact specifications Made in the U.S.A.

Feuling Econo Beehive Valve Springs Twin Cam Made from premium stress-relieved conical ovate wire Feature extremely high-level of fatigue life Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion Designed to handle the demands of performance engines with 585" and smaller lift camshafts Kits include: Econo BeeHive® valve springs, lightweight 7° steel retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system Seat lbs./installed height; 183 lbs. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0.574" lift), 160 lbs. at 1.845" (0.585" lift), 380 lbs. at 1.260" OPEN HEIGHT coil bind at 1.190" Dyno proven and track tested Feuling® BeeHive® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs Made in the U.S.A. Econo BeeHive® kits are direct replacement with no machining or rocker box clearance required for cams up to .574" lift for 84-04 Big Twin and 86-03 XL and up to .585" lift for 05-17 Twin Cam.

Feuling Endurance Beehive Valve Springs With Titanium Retainers Made from premium stress-relieved conical ovate wire Feature extremely high-level of fatigue life Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion Designed to handle the demands of performance engines with 585" and smaller lift camshafts Kits include: Econo BeeHive® valve springs, lightweight 7° steel retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system Seat lbs./installed height; 183 lbs. at 1.770" (0.510" lift), 175 lbs. at 1.795" (0.535" lift), 172 lbs. at 1.813" (0.553" lift), 165 lbs. at 1.835" (0.574" lift), 160 lbs. at 1.845" (0.585" lift), 380 lbs. at 1.260" OPEN HEIGHT coil bind at 1.190" Dyno proven and track tested Feuling® BeeHive® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs Made in the U.S.A. Econo BeeHive® kits are direct replacement with no machining or rocker box clearance required for cams up to .574" lift for 84-04 Big Twin and 86-03 XL and up to .585" lift for 05-17 Twin Cam.

Fueling Exhaust Stud Kit Features precision rolled threads for optimum engagement to prevent galling and promote more consistent torque loading. Eliminates thread problems associated with chromed hardware. Tensile strength rated at 170,000 psi; superior and stronger than O.E.M. and stronger than grade 8 fasteners.

Feuling High-Load  Beehive Valve Springs With Titanium Retainers For M8 Machined from a premium grade Hi-tensile chrome silicon single conical ovate wire, shot-peened with a specially processed thermal heat treat and super NexTex® finish to give these valve springs the needed fatigue life to exceed the high demands of V-Twin engines from stock to performance FEULING® BEEHIVE® valve springs use a smaller lighter weight retainer which drastically reduces the valve weight creating a quicker revving and smoother motion than comparable dual or single valve springs. Valve springs are a direct bolt-in replacement, no spring seat or rocker cover machining required up to .565” lift Springs will accommodate over .600 cam lift, but will require spring seat pocket machining on the cylinder heads to set correct spring open height Smaller lighter weight retainers which drastically reduce the valve weight creating a quicker revving and smoother motion than comparable dual or single valve springs Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics Kits include: matched set of Feuling® High Load Beehive® valve springs, Ti retainers, machined spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with a spring loaded valve stem wiper system ONLY recommended for large lift camshafts and RACE style engines as these valvesprings if not set properly will create extreme rocker arm deflection Seat lbs./Installed Height 151 Lbs. @ 1.475 (0.485 Lift) 144 Lbs. @ 1.498 (0.508 Lift) 143 Lbs. @ 1.501 (0.511 Lift) 140 Lbs. @ 1.511 (0.521 Lift) 124 Lbs. @ 1.562 (0.578 Lift) 120 Lbs. @ 1.582 (0.592 Lift) 304 Lbs @ 0.990 OPEN HEIGHT Coil Bind @ .945 Recommended for .540”+ lift camshafts Feuling® BeeHive® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs Made in the U.S.A.

Feuling High-Load Beehive Valve Springs With Titanium Retainers Made from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen™ polish Feature extremely high level of fatigue life Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion Designed to handle the highest demands of performance engines with high-lift, steep-ramped camshafts Kits include: High-Load BeeHive® valve springs, lightweight 10° Titanium retainers manufactured from Ti-17 alloy and micropolished for enhanced fatigue life, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system Seat lbs./installed height; 217 lbs. at 1.789" (.574" lift), 215 lbs. at 1.800" (.585" lift), 208 lbs. at 1.819" (.604" lift), 200 lbs. at 1.845" (.630" lift), 185 lbs. at 1.900" (.685" lift), 170 lbs. at 1.935" (.720" lift), 415 lbs. at 1.215" (open height) coil bind at 1.125" Dyno proven and track tested Feuling® BeeHive® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs Made in the U.S.A. Feuling® BeeHive® valve spring kits are direct replacement with no machining or rocker box clearance required up to .574" lift for 84-04 Big Twin and 86-03 XL and up to .700" lift for 05-17 Twin Cam. Larger camshafts require valve guide machining for seal-to-retainer clearance.

Feuling HP+ 525 Camchest Kit 07-17 (Chain Drive) Feuling® has created Bulletproof™ camchests! These kits take the guess work out of your engine build by packaging the necessary components together and ensuring each part is designed to work and function together perfectly. Feuling® guarantees maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. Camchest Kits include high volume Oil pump, high flow Camplate, Reaper® Series Camshafts, full travel hydraulic Lifters, adjustable Pushrods, Timken®/Koyo® Bearings, Gaskets, O-rings, Exhaust gaskets, ARP® cam/crank/pump/plate fasteners, moly paste, Loctite® and hardware. Features: Bulletproof™ your engine with maximum reliability 25-35 degree cooler engine temperatures 15-30 degree cooler oil temperatures 15-30 more pounds of oil pressure More power Quieter and smoother engine operation Eliminate wet sumping, blow by and oily air cleaners 525 Cam Info: 525 cams are a real workhorse, designed to increase torque band width and increase fuel economy. Great bolt in camshaft upgrade for stock 88 & 96 engines also performs very well in 103 strokers. Produces strong low and mid range power with a linear horsepower and torque curve. Can be used with factory valve springs, pushrods and lifters. Increases throttle response and eases starting. Will also respond well to increased compression and cylinder head work. RPM 1,750 - 5,500 Intake open/close 4°/42° Exhaust open/close 51°/5° Intake duration 226° Exhaust duration 236° Intake Lift .525" Exhaust Lift .535"

Feuling HP+ 525 Camchest Kit 07-17 (Gear Drive) Feuling® has created Bulletproof™ camchests! These kits take the guess work out of your engine build by packaging the necessary components together and ensuring each part is designed to work and function together perfectly. Feuling® guarantees maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. Camchest Kits include high volume Oil pump, high flow Camplate, Reaper® Series Camshafts, full travel hydraulic Lifters, adjustable Pushrods, Timken®/Koyo® Bearings, Gaskets, O-rings, Exhaust gaskets, ARP® cam/crank/pump/plate fasteners, moly paste, Loctite® and hardware. Features: Bulletproof™ your engine with maximum reliability 25-35 degree cooler engine temperatures 15-30 degree cooler oil temperatures 15-30 more pounds of oil pressure More power Quieter and smoother engine operation Eliminate wet sumping, blow by and oily air cleaners 525 Cam Info: 525 cams are a real workhorse, designed to increase torque band width and increase fuel economy. Great bolt in camshaft upgrade for stock 88 & 96 engines also performs very well in 103 strokers. Produces strong low and mid range power with a linear horsepower and torque curve. Can be used with factory valve springs, pushrods and lifters. Increases throttle response and eases starting. Will also respond well to increased compression and cylinder head work. RPM 1,750 - 5,500 Intake open/close 4°/42° Exhaust open/close 51°/5° Intake duration 226° Exhaust duration 236° Intake Lift .525" Exhaust Lift .535" Note: Gear drive camchest kits must purchase cam gear kit separately - see S&S #33-4275.

Feuling HP+ 525 Camchest Kit 99-06 (Chain Drive)   Feuling® has created Bulletproof™ camchests! These kits take the guess work out of your engine build by packaging the necessary components together and ensuring each part is designed to work and function together perfectly. Feuling® guarantees maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. Camchest Kits include high volume Oil pump, high flow Camplate, Reaper® Series Camshafts, full travel hydraulic Lifters, adjustable Pushrods, Timken®/Koyo® Bearings, Gaskets, O-rings, Exhaust gaskets, ARP® cam/crank/pump/plate fasteners, moly paste, Loctite® and hardware. Features: Bulletproof™ your engine with maximum reliability 25-35 degree cooler engine temperatures 15-30 degree cooler oil temperatures 15-30 more pounds of oil pressure More power Quieter and smoother engine operation Eliminate wet sumping, blow by and oily air cleaners 525 Cam Info: 525 cams are a real workhorse, designed to increase torque band width and increase fuel economy. Great bolt in camshaft upgrade for stock 88 & 96 engines also performs very well in 103 strokers. Produces strong low and mid range power with a linear horsepower and torque curve. Can be used with factory valve springs, pushrods and lifters. Increases throttle response and eases starting. Will also respond well to increased compression and cylinder head work. RPM 1,750 - 5,500 Intake open/close 4°/42° Exhaust open/close 51°/5° Intake duration 226° Exhaust duration 236° Intake Lift .525" Exhaust Lift .535" Note: Does not fit 06 FXD Models

Feuling HP+ 525 Camchest Kit 99-06 (Gear Drive) Feuling® has created Bulletproof™ camchests! These kits take the guess work out of your engine build by packaging the necessary components together and ensuring each part is designed to work and function together perfectly. Feuling® guarantees maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. Camchest Kits include high volume Oil pump, high flow Camplate, Reaper® Series Camshafts, full travel hydraulic Lifters, adjustable Pushrods, Timken®/Koyo® Bearings, Gaskets, O-rings, Exhaust gaskets, ARP® cam/crank/pump/plate fasteners, moly paste, Loctite® and hardware. Features: Bulletproof™ your engine with maximum reliability 25-35 degree cooler engine temperatures 15-30 degree cooler oil temperatures 15-30 more pounds of oil pressure More power Quieter and smoother engine operation Eliminate wet sumping, blow by and oily air cleaners 525 Cam Info: 525 cams are a real workhorse, designed to increase torque band width and increase fuel economy. Great bolt in camshaft upgrade for stock 88 & 96 engines also performs very well in 103 strokers. Produces strong low and mid range power with a linear horsepower and torque curve. Can be used with factory valve springs, pushrods and lifters. Increases throttle response and eases starting. Will also respond well to increased compression and cylinder head work. RPM 1,750 - 5,500 Intake open/close 4°/42° Exhaust open/close 51°/5° Intake duration 226° Exhaust duration 236° Intake Lift .525" Exhaust Lift .535" Note: Gear drive camchest kits must purchase cam gear kit separately - see S&S #33-4275.

Feuling HP+ 574 Camchest Kit 07-17 (Gear Drive) Feuling® has created Bulletproof™ camchests! These kits take the guess work out of your engine build by packaging the necessary components together and ensuring each part is designed to work and function together perfectly. Feuling® guarantees maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. Camchest Kits include high volume Oil pump, high flow Camplate, Reaper® Series Camshafts, full travel hydraulic Lifters, adjustable Pushrods, Timken®/Koyo® Bearings, Gaskets, O-rings, Exhaust gaskets, ARP® cam/crank/pump/plate fasteners, moly paste, Loctite® and hardware. Features: Bulletproof™ your engine with maximum reliability 25-35 degree cooler engine temperatures 15-30 degree cooler oil temperatures 15-30 more pounds of oil pressure More power Quieter and smoother engine operation Eliminate wet sumping, blow by and oily air cleaners 574 Cam Info: 574 cams have a wicked power band for modified engines and an excellent bolt in for stock 103 & 110 engines. Works very well with 95, 106, 107, 114 big bore engines. This is a great all around camshaft with solid low end performance and mind blowing mid and top end power. Extremely smooth cam lobe design creates a very smooth valve-train motion. Responds very well to modified cylinder heads, increased compression ratio, performance exhaust and intake systems. Performance valve springs are required on 99-04 engines and performance pushrods, lifters and clutch modifications are recommended. RPM 2,400-6,500 Intake open/close 15°/45° Exhaust open/close 61°/14° Intake duration 240° Exhaust duration 255° Intake Lift .574" Exhaust Lift .574" Note: Gear drive camchest kits must purchase cam gear kit separately - see S&S #33-4275

Feuling HP+ 574 Camchest Kit 99-06 (Chain Drive) Feuling® has created Bulletproof™ camchests! These kits take the guess work out of your engine build by packaging the necessary components together and ensuring each part is designed to work and function together perfectly. Feuling® guarantees maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. Camchest Kits include high volume Oil pump, high flow Camplate, Reaper® Series Camshafts, full travel hydraulic Lifters, adjustable Pushrods, Timken®/Koyo® Bearings, Gaskets, O-rings, Exhaust gaskets, ARP® cam/crank/pump/plate fasteners, moly paste, Loctite® and hardware. Features: Bulletproof™ your engine with maximum reliability 25-35 degree cooler engine temperatures 15-30 degree cooler oil temperatures 15-30 more pounds of oil pressure More power Quieter and smoother engine operation Eliminate wet sumping, blow by and oily air cleaners 574 Cam Info: 574 cams have a wicked power band for modified engines and an excellent bolt in for stock 103 & 110 engines. Works very well with 95, 106, 107, 114 big bore engines. This is a great all around camshaft with solid low end performance and mind blowing mid and top end power. Extremely smooth cam lobe design creates a very smooth valve-train motion. Responds very well to modified cylinder heads, increased compression ratio, performance exhaust and intake systems. Performance valve springs are required on 99-04 engines and performance pushrods, lifters and clutch modifications are recommended. RPM 2,400-6,500 Intake open/close 15°/45° Exhaust open/close 61°/14° Intake duration 240° Exhaust duration 255° Intake Lift .574" Exhaust Lift .574" Note: Does not fit 06 FXD Models