Best Selling Products

The Original Moonsmc® 5.75 Moonmaker Fly Eye® LED Headlight features a total of 21 USA CREE LED chips. This unique LED headlight creates an extremely bright low beam and high beam. The Fly Eye® LED headlight features an integrated light bar with 7 LED chips. The unique bullseye lens is used for the low beam which increases the depth field of vision that creates a flood beam pattern that covers each side of the road. As for the high beam, the clear lens creates a spot beam pattern that allows you to see farther down the road!The Fly Eye® LED headlight is extremely bright and noticeable to oncoming drivers which makes your ride safer!The other feature of this LED headlight is that it is very thin, so if you have an FXR which still has all of the stock wiring in the headlight bucket, you will not have any fitment issues!Features5600 Lumens (High Beam), 4200 Lumens (Low Beam)Ultra Slim Profile70 WattsUSA CREE LED ChipsDirect Plug-In Replacement5-3/4" SizeHigh Beam & Low Beam6500K Super Bright White LightAluminum HousingShock and Vibration ResistantWaterproof: IP67Low Power ConsumptionLifetime WarrantyWeight: 1.10 lbsFitmentAll Harley Models which have a 5 3/4" Headlight If you have a 2018 or newer bike, please see our M8 Plug and Play headlight bucket kit for easy an install! * PATENT PENDING * ** FOR OFFROAD USE ONLY **

Upgrade both your front blinkers and rear brake/blinker pods with our top quality, super bright LED V2 MoonPods. These replace your halogen bulbs with bright, new technology LED lights! The front turn signals have a full white running light, and when the turn signal is activated they blink in a very bright amber unique sequence making you much more visible to drivers. The MoonPods V2 are fully sealed units so no water and or moisture can get inside them! The rears have a red running light with a bright red blinker/brake light. Checkout our Smoked Lenses and or Clear Lens Kit here! If you are not sure which bulbs you need for your bike, please contact us before ordering or check your service manual. FeaturesPlug and PlaySequential BlinkerFully Sealed UnitMuch wider viewing angleBCM CompliantLatest LED TechnologyLow Power ConsumptionSafer and Brighter than StockComes as a pairLifetime Warranty FitmentHD Models up to 2022 Do I need a Load Equalizer?Our Load Equalizer is only required when installing these bikes - 2010 and older Softails, ’2011 and older Dynas, ’2013 and older Sportsters and ’2014 and older Touring. * Patent Pending *

Looking to add some style to your bike and also tired of having a hard time seeing what's in front of you at night on those back canyon roads? The new MOONSMC® V3 dual-function light bar features improved LED technology which delivers up to 40% more lumens than before. The V3 light bar has two built-in functions where you can switch from a 6500k White LED to a super bright Amber LED via a button on the back of the light bar.The White LED function is great for night riding and the Amber LED works great during the day making you much more visible to drivers.Add our WIRE HARNESS for an easy plug and play install!Features3900 Raw LumensSize: 6 inchStainless Steel Mounting Bracket and Hardware4D Patent Pending OpticsSize: 6 inchAluminum HousingShock and Vibration ResistantHigh Impact Polycarbonate LensIP68 Compliant - Dust/Water IngressLow Power ConsumptionHigh Grade Aluminum Alloy Housing And Heat SinkLifetime Warranty ** PATENT PENDING **

Arlen Ness OE Size Jagged Rotors Features: High performance floating brake rotors designed to enhance braking performance and style of factory wheels 420 Stainless construction, drilled for optimum performance and heat dispersion

Bassani Road Rage 2-Into-1 Systems M8 Softail Features: 1-3/4" headpipes step up to 1-7/8" into the collector to increase flow and improve performance Includes: Heat shields, removable spiral-core louvered baffle, and mounting hardware Made in the U.S.A.

Bassani The Ripper Short Road Rage 2-Into-1 Exhaust System Features: Design with a louder, more aggressive tone than the Shorty Road Rage M8 Softail exhaust systems Developed in conjunction with Chris Rivas to develop the right system to address M-Eight big motor builds Stepped 1 3/4” to 1 7/8” headpipes Features equal-length stepped headpipes from 1-3/4” into 2” and then into 2-1/8” Fully-welded one-piece design 4” muffler housing has 3” louvered removable baffle Utilizes an advanced inner collector for maximum performance Includes full heat shields, billet end cap, 18 mm O2 bung and 12 mm adapters Baffle measures 10” x 2.25” Recommended for bikes with motor builds above 140 hp. Mild steel construction and full heat shields on chrome and black; stainless system has partial heat shields Hand MIG welding 18mm O2 bungs with 12mm adapters Made in the U.S.A. Race waiver needed for California customers (Click Link to Access)

Bassani Road Rage II 2-Into-1 Mid-Length System Features: 4" reverse-cone megaphone muffler body with matching billet end cap 1-3/4" headpipe steps up to 1-7/8" into the collector to increase flow and improve performance Removable spiral-core louvered baffle included Features hand MIG welding 18 mm and 12 mm O2 ports with adapters and plugs Includes mounting hardware and full heat shields Made in the U.S.A. Race waiver needed for California customers (Click Link to Access)

Arlen Ness Cartridge Hub Kits Features: Proprietary billet aluminum wheel hub kits designed and engineered exclusively for our Arlen Ness forged aluminum wheels Cartridge design hub features both wheel bearings pre-set in one hub for optimum radial and lateral run out accuracy Lightweight coped design provides form and function Includes everything you need for ABS or non-ABS Harley applications regardless of your wheel diameter Accept factory or aftermarket hub mounted 5-bolt hub mounted rotors (3.25" bolt circle). Hub kits mount to your Arlen Ness forged rims in minutes with basic tools offering excellent flexibility for stock and custom applications

Feuling Sump Plug HELP ELIMINATE SUMPING ISSUES!Eliminate blocking the internal engine case scavenge pick up hole with the FEULING bottom case Short Sump Plug. A common issue with both Twin Cam and Milwaukee Eight engines (more common with Milwaukee Eights) is the sump plug can block off the internal scavenge (return) pick up port. By using a shorter plug, we eliminate the possibility of the plug blocking off this cross port.NOTE: The M-EIGHT main sump cross port on the inside of the M-Eight engine case is in a slightly different location & height in each engine case. This cross port is created when the bottom plug hole is machined and tapped by the factory. The machining breaks through the casting wall, creating the sump port. Whereas the Twin Cam engine cross scavenge pick up hole is a machined bore, and is in the same location in every engine case.The further the bottom plug installs into the case, the more of the scavenge cross port is blocked off. For optimum oil scavenging & lower sump levels, it is advisable to use FEULINGs new Short Sump Plug which will ensure the cross sump port is wide open and allows the oil pump to pull as much as possible from the sump.The FEULING Plug is 0.265 Tall vs. OEM 0.465.  

Barnett Replacement Clutch Cables Features: Coated cables offer that custom look without the fear of damaging areas that the cables come in contact with Available in easy-pull high-efficiency design in standard diameters High-efficiency clutch cables reduce lever effort by up to 40% Made in the U.S.A.

Drag Specialties Replacement Half Clamps Features: Faithful reproduction of the original clamp halves that secure the handlebar master cylinder or clutch control Die-cast aluminum construction Available in chrome or black Sold each

Thrashin Handlebar Clamp Features: 6061 aircraft-grade billet aluminum For use with most 99-19 Harley-Davidson models with 3-1/2" on-center risers and offset mounting holes Made in the U.S.A.

ODI Podium V-Twin Handlebars Features: Constructed of 7075-T6 alloy for added strength Shot-peened and hard anodized black for improved durability Slotted for internal wiring and notched for TBW Laser-etched ODI graphics Knurled left side helps with grip bar adhesion

Performance Machine PhatBar Handlebar and Riser Kits Features: Comes complete with a fly-by-wire ready aluminum handlebar and a billet riser set that mount to most Harley Davidson models Bar features an 1-1/4" clamping area tapered down to 1" to accommodate stock hand controls without any modifications Bar made from 7050-T6 aluminum with a 3” rise and slots for internal wiring Risers feature a 9” rise and are made from 6061-T6 billet aluminum Compatible with cable throttle and electronic throttle applications