Chassis Components

Kraus Vector Axle Adjuster Keep your belt or chain tensioned and your wheel aligned with our Vector One Billet Bagger Axle Adjuster. The functional problem with the Stock Bagger Swingarm is the axle adjusters and axle. The stock setup is engineered for motors with limited torque. The stock axle adjusters have a tendency to slip under load; when you give it the pepper your stock axle can slip resulting in a loose belt and a misaligned rear wheel. Wheel alignment is a major geometry concern, we have seen just a small amount of wheel misalignment create speed wobbles and ill-handling effects. The Kraus Vector One Adjuster uses a threaded locking mechanism that is easy to adjust and secures perfect wheel alignment no matter how much torque you throw at it. A must have upgrade for all baggers, especially high horse power machines. Quality: The high grade nickel plated 1144 Stress proof alloy steel axle is nearly 2 times stronger than a stainless axle. The adjuster housings and slides are billet aluminum. The axle nuts are Stainless and are secured by a c-clip. Ease of alignment: You don't need coat hangers or zip-ties to align your wheel. Using clocking tick marks and a locking screw mechanism makes it easy and secure. Fits 2009-2020 Touring/Bagger Models

+1 Extended KickstandAddress the altered lean angle of your motorcycle when upgrading to taller front ends or extended rear shocks with this +1 Extended Kickstand. This kickstand helps eliminate excessive leaning, providing better stability when parked, especially beneficial for modified Dyna models. Available in Chrome or Black finish to match your bike's style. Specifically designed to fit 1999-2017 Dyna models. Reuses your existing stock spring and hardware for straightforward installation.

Replacement Swing Arm Bushings Features: Replacement swing arm bushings  Replaces worn/damaged bushings, firms up handing and tracking Kit includes bushings and tolerance rings

Replacement Swing Arm Isolator Features: Fits 86-00 FXR and 86 -08 FLT Urethane motor mount specially designed to out-last and out-dampen the OEM part Sold individually

Energy Suspension Front Motor Mount  Features: Manufactured with proprietary Hyer-Flex Polyurethane Outperforms and outlasts OEM rubber Resists oils and chemicals Smoother ride

Accutronix Pivot Blocks  CNC-machined T-6 billet aluminum Includes mounting hardware Made in the U.S.A.

Motor Mount Stabilizers MOTOR MOUNT STABILIZERS Available in a chrome finish Two required for FLT/FLHT applications One required for Dyna Glide applications Includes mounting hardware Sold each

Custom Cycle Engineering Swingarm Conversion Retro Kits Replaces stock Cleve Bloc style swingarm bushings with spherical bearings Dramatically changes handling and tracking of Dresser models Spherical bearings greatly reduce the stiction at the swingarm pivot, which provides a quicker reaction time to harsh road conditions Negates any lateral and torsional movement in the swingarm Made in the U.S.A.

CNC machined out of 6061 aluminum Includes steering stem and external hardware for use with stock XL steering stops Pre-drilled for internal fork stops These trees have been designed for better stability especially when used with longer than stock shocks Will provide more stability at high speed, with a modified offset to increase the trail Made in the U.S.A.

SlyFox Custom 49mm Triple Trees CNC-machined 6061-T6 aluminum construction Zinc-plated steel stem Six lb lighter than stock trees Stock rakes include fork stop Accepts stock risers and bushings Compatible with OEM upper stem assembly and bearings Made in the U.S.A. FLTR models will require gauge relocation. Will require relocation of ignition switch. Not for use with fork boot covers/sliders.

Speed Merchant Elite 49mm Triple Trees Manufactured from 6061 billet aluminum Bottom headlight mount included unless noted Designed with a modified offset to provide increased stability All hardware is stainless steel Made in the U.S.A. Does not have fork lock capability.

Arlen Ness Method Triple Tree CNC machined 6061 billet top triple tree for '15-up Road Glide Models Lightweight design features method styling and cut through windows Direct bolt-on fitment accepts all factory front end components Compliments Ness Method riser kits & ignition kits for Road Glides for a full custom front end look with factory function Black anodized finish

OE replacement triple clamp Available in just the upper clamp CNC machined 6061-T6 Aluminum Zinc-plated steel bottom stem provided in the full kit Lighter and stronger than stock Made in the USA Ignition switch delete required