Chassis Components

Swingarm Bearing Kit with Spherical Bearings Swingarm bearing kit with spherical bearings controls lateral and torsional movement at pivot point. Kit includes swingarm retaining ring rear fork nylon swingarm pivot washer rubber mount bushing swingarm pin outer spacer sleeve inner sleeve spherical bearing. Outer diameter of bearing is 1.753 inch. Fitment Harley Davidson FLT 1982 Harley Davidson FLT 1983 Harley Davidson FLT 1984 Harley Davidson FLT 1985 Harley Davidson FLT 1986 Harley Davidson FLT 1987 Harley Davidson FLT 1988 Harley Davidson FLT 1989 Harley Davidson FLT 1990 Harley Davidson FLT 1991 Harley Davidson FLT 1992 Harley Davidson FLT 1993 Harley Davidson FLT 1994 Harley Davidson FLT 1995 Harley Davidson FLT 1996 Harley Davidson FLT 1997 Harley Davidson FLT 1998 Harley Davidson FLT 1999 Harley Davidson FLT 2000 Harley Davidson FLT 2001 Harley Davidson FLT 2002 Harley Davidson FXR 1982 Harley Davidson FXR 1983 Harley Davidson FXR 1984 Harley Davidson FXR 1985 Harley Davidson FXR 1986 Harley Davidson FXR 1987 Harley Davidson FXR 1988 Harley Davidson FXR 1989 Harley Davidson FXR 1990 Harley Davidson FXR 1991 Harley Davidson FXR 1992 Harley Davidson FXR 1993 Harley Davidson FXR 1994

FXR Swing Arm Rebuild Kit  Kit includes two bushing assemblies spacers plastic retainer rings plastic dust covers rubber isolators and one pivot shaft with locknut and sleeve. Includes all parts to mount transmission and swingarm to pivot block. Fitment Harley Davidson FXR 1982 Harley Davidson FXR 1983 Harley Davidson FXR 1984 Harley Davidson FXR 1985 Harley Davidson FXR 1986 Harley Davidson FXR 1987 Harley Davidson FXR 1988 Harley Davidson FXR 1989 Harley Davidson FXR 1990 Harley Davidson FXR 1991 Harley Davidson FXR 1992 Harley Davidson FXR 1993 Harley Davidson FXR 1994

FXR Swingarm Pivot Kit Swingarm pivot kit includes 4 bearings 2 aluminum spool spacers swingarm pin and two nuts. With dual ball bearings on each side. Sold as a 11 piece kit. Fitment Harley Davidson FXR 1986 Harley Davidson FXR 1987 Harley Davidson FXR 1988 Harley Davidson FXR 1989 Harley Davidson FXR 1990 Harley Davidson FXR 1991 Harley Davidson FXR 1992 Harley Davidson FXR 1993 Harley Davidson FXR 1994

Swingarm Rebuild Kit Fitment Harley Davidson FXD 2000 Harley Davidson FXD 2001 Harley Davidson FXD 2002 Harley Davidson FXD 2003 Harley Davidson FXD 2004 Harley Davidson FXD 2005

Trask Swing Arm Assault Race-inspired design to increase rigidity and decrease wobble, Precision machined from Billet T6061 aluminum, Modular design that is lighter than stock without cam-style adjusters, Comes in stock length; extended arms adjustable from 2* - 4* stretch, Comes raw and unassembled to allow for custom paint, Kits include delrin chain guides, carbon fiber cover plates, new spherical bearings, stainless steel axle and hardware, Made in U.S.A, Powder coating is not recommended for this product. Anodizing or cerakote is strongly suggested.

Swingarm - The Swinger Three piece, CNC-machined aluminum swingarm that is bolted, pinned and then welded for maximum strength, 7 lb. lighter than a stock swingarm, 25 mm chromoly axle with stainless steel adjuster bolts and nuts, Accepts stock pivot shaft, bearings, spacers and rubber mounts, Adjustable shock mounts, Machine finish, Made in the U.S.A., This is a highly custom part that will require custom fabrication of some key components, will not accept an OEM brake caliper; a custom caliper and bracket will be required., If converting to a chain drive system, a custom chain slider will need to be fitted to prevent chain wear on the swingarm., Will require the use of a rear wheel that accepts a 25 mm axle.

Swingarm Bushing Kit For stock OEM rear engine isolator mounts, Drastically reduce motor flop / movement while still dampening vibration, Made in the U.S.A, The black swingarm isolator bushings pictured are not included in the kit.

Trask Swing Arm Assault Softail Precision machined from Billet T6061 Aluminum, Race inspired design to increase rigidity while reducing weight, Pocketed joints are engineered for maximum strength by eliminating the need for welding, 100% bolt on factory replacement for seamless installation , Includes Titanium axle and hardware for superior strength and weight savings, Accepts OEM brake caliper with supplied bracket, Includes new spherical bearings , Come unassembled and in a raw machined finish to allow for custom finishing options. , Please use caution when custom finishing, anodizing is recommended and please use caution when powder coating mating surfaces., If converting to a chain drive system, a custom chain slider should be fitted to prevent chain wear on the swingarm.