On Sale

Nylatron Swing Arm Bushing Kit Nylatron swingarm four piece bushing set replaces swingarm bearings and stabilizes swingarm rubber mounts. Features: Order pin and frame mount bushings separately. Fits: FLT 1982-2002 FXR 1982-1994 FLHT 1982-2002 FLHR 1995-2002

49 mm Top Tree Got a early late model dyna with the integrated bar mounts? Looking to get yourself into a new bar set up? This is the tree for you Features: Available in Chrome Direct Replacement for 49mm Tree Works with Your Stock Lower Tree Accepts 49mm Legs Does Not Fit FXDL Models

Further Forward Mids Further forward mid-control kit repositions controls 2" forward of the stock location. This kit is helpful for those who feel cramped in the "knees high" riding position of standard mid-controls. It also opens up space for better maneuvering while standing or parking and offers easier access to jiffy stand. Includes left and right footrest brackets, brake and shift levers and installation hardware. Use stock footpegs, brake and shift linkage. For use with stock FXD footpegs and floorboards such as OEM #50500247 which provide extra foot room and upright seated position. Fits 2006- 2017 Dyna models with mid controls. It would be located in the same position (except further forward), as seen on the 2014-2017 FXDL and FXDLS models. Features: Fits 2006-2017 Dyna Uses Stock Linkage and Brake Rod Works With Stock Frame Mounts

FXR Fender Struts  Looking to update your shock location on your FXR or maybe even just the looks. These OEM Style fender strut covers allow for both OEM and FXRP/RT (Early Style) mounting. Features: Replica Rear to OEM Show Quality Chrome Finish Fits 1982-1994 FXR

FXR Mid Control Kit FXR mid control kit allows the use of custom footrests. Kit includes factory style components for a mid control. Order brake line, reservoir feed line and hardware seperately. Addtional hardware is required.  Features: Chrome Peg Mounts OE Replica Pegs Shift Linakage Shifter and Peg Brake Master Cylinder

FXR Inner Primary Looking for a nice inner primary replace your stock that came with your bike? Vtwin Manufacturing offers some of the best reproduction OEM parts in the market and this is one of them! Features: Quality OE Replacement Pre Drilled for Mid Controls Quality Casted 90-93 Fitment

Crash Bar for Dyna with Floorboards Looking for a nice crash bar to replace your stock one that came with your bike? Vtwin Manufacturing offers some of the best reproduction OEM parts in the market and this is one of them! Features: 1 ¼ Tubing Around Works with Floor Boards Similar to the Original FXDP Bar (No Tabs) Inlcudes Mounting Hardware Comes in Chrome

Dyna Floor Board Kit Looking for a nice Floor Board setup for your Dyna? Vtwin Manufacturing offers some of the best reproduction OEM parts in the market and this is one of them! Features: Similar to the FXDP and Touring Models Mounts Included Brake Pedal Included Extended Brake Rod Included One Piece Heel-Toe Shifter (99-05 Kit Only) Mid Retainers Shift Shaft Cover

V2 Black Rocker Box Set for Evo Set is precision die-cast covers that are machined polished with black finish. Six piece complete set includes all necessary gaskets for installation for both Evolution heads.  Features: Fits: FX Models -1984-1999 FLT Models - 1984-1999

Evo Replacement Nose Cone Cover for Big Twin models features installed bushings and includes seal. Comes with gaskets and mounting screws. Features: Gloss Black Powder Coat Mounting Screws Included Bushings and Seals are Included Fits 1984-1992 Evo Models

GP Suspension Cartridges GP Suspension cartridges for you Harley. Get your bike stuck to the road while you tear through the twisties. Please use the quote form to place your order. Prices range from $1499 (without tools) to $1673 (with tools). Customs lengths are available (+2,-2,ect..). Features: Full Cartridge System Optional Colors (Red, Blue and Black) Option Top Spanner Available With or Without 8pin Tool Variable Spring Rates  

Bung King Dyna Softail 1 Piece Risers These are a one piece lower riser made specifically for the 2018 Street Bob and similar models with the digital gauge as part of the riser clamp. Multiple heights are available, as well as the option to have them drilled for internal wire. Made from steel for extra strength with a one piece lower clamp to reduce the twisting usually seen with taller risers. Features: Made of Mild Steel and Powder Coated Gloss Black Tapered to Accept ½ x 13 Bolts on the Bottom Side Accepts Factory Upper Clamp and 1in Diameter Bars 1- ¼ Diameter Uprights Available in Custom Sizes Sold Ea Allow 1-2 Weeks Shipping for Custom Sizes